1984 digital tach problem
Thread Starter
Intermediate
Joined: Sep 2002
Posts: 34
Likes: 0
From: Columbus OH
1984 digital tach problem
I have a tach with all the lights lit up all the time , except a few down near zero. and no digital read-out. On the coil side tach.wire (wht) it has a couple connectors . now should this wire coming from the filter have the other end plugged into the harness , or should the harness be plugged into the other end of the filter? right now there is nothing plugged into to back end of the filter. all I can see from the books is that there should be a wire ( wht) coming from the coil to the filter then from filter to the harness which goes to the engine bulkhead then the cluster. any ideas here ? feel real dumb on this one 
