[UPDATE] - Engine Rebuild in Progress
Thread Starter
Le Mans Master
Joined: Jan 2002
Posts: 7,460
Likes: 5
From: Burnet, TX
[UPDATE] - Engine Rebuild in Progress
For anyone watching my rebuild...
http://corvette.wbisolutions.com
Yesterday I got my block back from the machine shop. They hot tanked it, Magged it, Honed it and pressed in the cam bearings. Brought it home and installed the crank, camshaft, knock sensor, Melling HV Oil-Pump, Engine mounts, roller lifters and lifter retatainer.
On the 15th everything on the lower end will be done and my heads will be sent in for new valve guides, 3-angle valve job, springs, retainers and valves.
I will get the website updated with pics in the next few weeks. :)
:cheers:
http://corvette.wbisolutions.com
Yesterday I got my block back from the machine shop. They hot tanked it, Magged it, Honed it and pressed in the cam bearings. Brought it home and installed the crank, camshaft, knock sensor, Melling HV Oil-Pump, Engine mounts, roller lifters and lifter retatainer.
On the 15th everything on the lower end will be done and my heads will be sent in for new valve guides, 3-angle valve job, springs, retainers and valves.
I will get the website updated with pics in the next few weeks. :)
:cheers:
Safety Car
Joined: Feb 2000
Posts: 3,771
Likes: 0
From: MANDEVILLE, LA La
Re: [UPDATE] - Engine Rebuild in Progress (Red84CrossFire)
Thread Starter
Le Mans Master
Joined: Jan 2002
Posts: 7,460
Likes: 5
From: Burnet, TX
Re: [UPDATE] - Engine Rebuild in Progress (CAJUN C4)
Check my web page again, you will see that I modified the stock intake and it flows about 10 less CFM that a X-RAM.... so no biggie.
:cheers:
