.....
steering rack assy
Former Vendor
Joined: Feb 2017
Posts: 173
Likes: 18
From: Saginaw Michigan
Without changing the whole front end geometry, a C5 rack will not fit an 86 Corvette. If your factory rack is in need of repair, we can rebuild it and return it to factory specs.
Last edited by steering_experts1; Jan 23, 2018 at 05:59 AM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Former Vendor
Joined: Feb 2017
Posts: 173
Likes: 18
From: Saginaw Michigan
The cost of a C4 rack rebuild starts at $250, C5/C6 rack rebuilds start at $300. If any hard parts need to be repaired or replaced then the cost would go up accordingly. Turn around time is roughly 2 weeks.
Thanks,
Junior
Thanks,
Junior
Last edited by steering_experts1; Jan 26, 2018 at 08:28 PM.
Former Vendor
Joined: Feb 2017
Posts: 173
Likes: 18
From: Saginaw Michigan
Drifting
Joined: Mar 2015
Posts: 1,275
Likes: 165
From: Utah
Turnone did mine, Jr was very helpful to answer all of my questions.
My rack is pretty much just the original shell with new everything inside (early rack issues), i love it now.
Coupled that turn one rack with a 94 steering shaft and the car is just fantastic!
Total confidence well over 100mph...
Also my rack had the classic "morning sickness", required the rack to be bored and sleeved.
basically the worst sinerio...
I believe with shipping to and from, and the full service it was right about $550 iirc...
i have a Z51/2.0 ratio that i wanted to keep, well worth the price, and the steering is still perfect 2+ years later and some very hard driving.
My rack is pretty much just the original shell with new everything inside (early rack issues), i love it now.
Coupled that turn one rack with a 94 steering shaft and the car is just fantastic!
Total confidence well over 100mph...
Also my rack had the classic "morning sickness", required the rack to be bored and sleeved.
basically the worst sinerio...
I believe with shipping to and from, and the full service it was right about $550 iirc...
i have a Z51/2.0 ratio that i wanted to keep, well worth the price, and the steering is still perfect 2+ years later and some very hard driving.
Last edited by Gibbles; Jan 30, 2018 at 08:46 PM.
Le Mans Master
Joined: Dec 2005
Posts: 8,584
Likes: 972
From: Communist Colorado
I did the job in my 93 Z28.... but not a Vette..... I understand its pretty involved.... I have a tad bit of the morning sickness thing and I know I'll need to do it sooner or later....
