Tuner Pro RT data
Thread Starter
Drifting
Joined: Feb 2013
Posts: 1,464
Likes: 48
Tuner Pro RT data
Hello,
I just got the Tuner Pro RT software working on my 1989 6 spd. Corvette.
I have two questions.
1) analysis - is there someone or place that can help me analyse the data. My O2 sensor was red and over 900 all through the test drive.
2) changes - what hardware do I need to make changes that will improve the car.
Thank you
Joe
I just got the Tuner Pro RT software working on my 1989 6 spd. Corvette.
I have two questions.
1) analysis - is there someone or place that can help me analyse the data. My O2 sensor was red and over 900 all through the test drive.
2) changes - what hardware do I need to make changes that will improve the car.
Thank you
Joe
Racer
Joined: Jul 2000
Posts: 306
Likes: 26
From: Chandler,AZ,USA AZ
Try hese sites
http://www.scotthansen.net/
And
http://moates.net/
They have products and links that might be helpful. Both have been good to answer questions for me.
And
http://moates.net/
They have products and links that might be helpful. Both have been good to answer questions for me.
Race Director
Joined: Nov 2003
Posts: 12,221
Likes: 446
From: Overland Park Kansas
2020 Corvette of the Year Finalist (appearance mods)
C4 of Year Winner (appearance mods) 2019
Yeah....And do you have any modifications from stock?
If not, this is an exercise is diagnostics...vs analysis. Injector failure would be at the top of my list. (If one/two fail on the driver's side (O2 side), the rest will over-compensate and drive it very rich.
If so, adjusting injector size and/or MAF tables is the first step.
Last edited by GREGGPENN; Feb 20, 2018 at 12:20 AM.
