[LPE Valve Covers] Which is Which?
Thread Starter
Team Owner
Joined: Apr 2000
Posts: 27,818
Likes: 8
From: CT
[LPE Valve Covers] Which is Which?
I've noticed every pic I'd seen of an engine with LPE Valve Covers..the fill cap is always on the left. Does it matter which goes on what side?
:) Mine will be going on soon...and I was curious about this.
Thank you :)
:) Mine will be going on soon...and I was curious about this.
Thank you :)
Instructor
Joined: Jul 1999
Posts: 155
Likes: 30
From: Manchester, TN
Re: [LPE Valve Covers] Which is Which? (JD 90 383)
Mine is on the right side. Just like stock. http://groups.msn.com/MyPublicsiteAl...to&PhotoID=365
[Modified by AlHale, 8:32 PM 10/14/2002]
[Modified by AlHale, 8:32 PM 10/14/2002]
Thread Starter
Team Owner
Joined: Apr 2000
Posts: 27,818
Likes: 8
From: CT
[LPE Valve Covers] Which is Which?
Thanks Guys.
Al, nice motor you have there. I got these covers from forum member -=Jeff=- They're in good condition, but don't have the multi-colored writing any more.
I'm getting used to the billet lid. Each time I go by the super ram with it on, I smile a little more. At first, I didn't like it. No stripes is cool lookin'
Thanks again for confirming it's ok to do them either side.
Al, nice motor you have there. I got these covers from forum member -=Jeff=- They're in good condition, but don't have the multi-colored writing any more.
I'm getting used to the billet lid. Each time I go by the super ram with it on, I smile a little more. At first, I didn't like it. No stripes is cool lookin'
Thanks again for confirming it's ok to do them either side.
