Suspension issues
Melting Slicks
Joined: Dec 2004
Posts: 2,656
Likes: 635
From: Dallas TX
Im with the "sell em and buy something that fits right" camp....because you will NEVER fix your issue by stiffening the suspension unless you install steel pipes in place of the shocks to keep the suspension from compressing at all. If you ONLY address the rear suspension to attempt to "rectify" your ordering mistake, the car will ride and handle like **** because the rear and the front will be completely differently sprung and valved as well as having less travel in the rear(which is essentially what you are trying to accomplish)...not a good idea IMO.
Get the correct wheel on the car.
Safety Car
Joined: Aug 2013
Posts: 4,429
Likes: 605
From: Minneapolis Mn
Here's a site that might help you out of this mess: https://www.wheel-size.com/calc/?wheel1=245-50-16X9.5ET38&wheel2=255-40-18X9.5ET40&fcl=50mm&wcl=30mm&scl=50mm&sr =0mm
I used this site when I redid my 86. I went from 9.5x16 +38 rims with 255x50x16" tires. I ended up getting 9.5x18 +40 rims with 255x40x18" tires. They fit just like the originals and no interference or rubbing.
Check the site I noted using your original tire and rim information and what you want and it will tell you what will fit and what won't.
PS I agree unless you want to hog out your wheel wells and put on some ungodly flairs, those rims and tires you have are only going to damage your car.
I used this site when I redid my 86. I went from 9.5x16 +38 rims with 255x50x16" tires. I ended up getting 9.5x18 +40 rims with 255x40x18" tires. They fit just like the originals and no interference or rubbing.
Check the site I noted using your original tire and rim information and what you want and it will tell you what will fit and what won't.
PS I agree unless you want to hog out your wheel wells and put on some ungodly flairs, those rims and tires you have are only going to damage your car.
Last edited by hcbph; Aug 20, 2018 at 08:30 PM.
Team Owner
Joined: Sep 2003
Posts: 25,394
Likes: 2,741
The OP has used 2 very similar 'USER ID' since May it seems. At some point in the past couple days he's seen his errors and will stack these in 'the corner'. I was going to suggest Cray in this thread but I stumbled upon his 'other' thread and realized that I guess he's shopping Cray presently.
Ridiculous - maybe!!!
This is one of his others
https://www.corvetteforum.com/forums/c4-tech-performance/4137415-desperately-seeking-more-info.html
https://www.corvetteforum.com/forums/c4-tech-performance/4137417-jdc-desperately-seeking-more-info.html
Who will he be next time he forgets his password?
Ridiculous - maybe!!!
This is one of his others
https://www.corvetteforum.com/forums/c4-tech-performance/4137415-desperately-seeking-more-info.html
https://www.corvetteforum.com/forums/c4-tech-performance/4137417-jdc-desperately-seeking-more-info.html
Who will he be next time he forgets his password?
Last edited by WVZR-1; Aug 20, 2018 at 08:57 PM.
Thread Starter
Instructor
Joined: Aug 2018
Posts: 180
Likes: 20
The OP has used 2 very similar 'USER ID' since May it seems. At some point in the past couple days he's seen his errors and will stack these in 'the corner'. I was going to suggest Cray in this thread but I stumbled upon his 'other' thread and realized that I guess he's shopping Cray presently.
Ridiculous - maybe!!!
This is one of his others
https://www.corvetteforum.com/forums/c4-tech-performance/4137415-desperately-seeking-more-info.html
https://www.corvetteforum.com/forums/c4-tech-performance/4137417-jdc-desperately-seeking-more-info.html
Who will he be next time he forgets his password?
Ridiculous - maybe!!!
This is one of his others
https://www.corvetteforum.com/forums/c4-tech-performance/4137415-desperately-seeking-more-info.html
https://www.corvetteforum.com/forums/c4-tech-performance/4137417-jdc-desperately-seeking-more-info.html
Who will he be next time he forgets his password?
I joined Corvette forum recently because I'm quite aware of my ignorance. Thank you so much for pointing that out.
No-one likes a Mr. Know-it-all, but to insult my lack of knowledge (while I'm tying to learn) just to make yourself feel superior is childish.
ALL OVER SOME WHEELS? REALLY?
I came asking for advise but you seem more than happy to troll me with your high and lofty facts about the C4 and cut me down with in-depth detective work. GET A LIFE! I feel sorry for you bro. When you lose your ability to forgive, you lose your ability to have friends.
I know you are a very lonely and bitter person. I forgive you.
Go ahead. Throw your next insult if it gives you something to do while you're sitting on the toilet. More fun than Readers Digest I suppose. I 'll read it and feel sorry for a very sad person. I'm done.
Racer
Joined: May 2008
Posts: 312
Likes: 19
WVZR-1 has spent more time researching and helping people on this forum than any other member that I am aware of. You on the other hand are someones child that got his daddys vette for free, then bought a set of wheels and tires for it that do not fit. I am not impressed.
Thread Starter
Instructor
Joined: Aug 2018
Posts: 180
Likes: 20
Haters gonna hate.
it's not my goal to impress anyone. I just came looking for information from guys that know more than me. Had no clue early C4s were so different from later C4s.
I didn't come here looking for insults from the high and mighty Corvette gods. Forget this. This thread left the advise category long ago.
I loved my dad so I wanna take care of his Vette. That's why I'm here. I'm really a mustang guy. My dad worked at the Super Duty plant in KY. Along with his back and sweat, Ford put food on my plate and a roof over my head.
Nice that you feel the need to defend your buddy from a newbie owner.
I enjoy sharing my 25 yrs experience with homeowners that want to the project done right. But I certainly don't insult them over their lack of knowledge. Just saying he doesn't have to be a jerk about it.
it's not my goal to impress anyone. I just came looking for information from guys that know more than me. Had no clue early C4s were so different from later C4s.
I didn't come here looking for insults from the high and mighty Corvette gods. Forget this. This thread left the advise category long ago.
I loved my dad so I wanna take care of his Vette. That's why I'm here. I'm really a mustang guy. My dad worked at the Super Duty plant in KY. Along with his back and sweat, Ford put food on my plate and a roof over my head.
Nice that you feel the need to defend your buddy from a newbie owner.
I enjoy sharing my 25 yrs experience with homeowners that want to the project done right. But I certainly don't insult them over their lack of knowledge. Just saying he doesn't have to be a jerk about it.
Last edited by PoprocksC4; Aug 21, 2018 at 03:17 PM.
Thread Starter
Instructor
Joined: Aug 2018
Posts: 180
Likes: 20
Problem solved! FYI
MOSTLY . New KYB shocks REALLY helped a lot. I also stacked about a half inch of washers under the long bolts behind the rear wheels ( controls the ride hieght) to raise the drivers side. Tire rub is 99.9% gone.
It was riding low on one side. I figure a bushing kit is in my future this winter.
The wheels look really cool sticking out a little bit with only +30mm offset on a 10 inch rim. However, i will be looking at something with a +45-51 et for my next set. I don't mind changing wheels every other year. Its a whole new look to the car. And you get decent return on wheels that have good tires already mounted.
thanks for the suggestions.
It was riding low on one side. I figure a bushing kit is in my future this winter.
The wheels look really cool sticking out a little bit with only +30mm offset on a 10 inch rim. However, i will be looking at something with a +45-51 et for my next set. I don't mind changing wheels every other year. Its a whole new look to the car. And you get decent return on wheels that have good tires already mounted.
thanks for the suggestions.
