A.i.r pump
07-08-2019, 04:27 PM
#1
Instructor
Thread Starter
A.i.r pump
Had to remove the A.i.R. pump/blower to access rad housing screws. Found the plastic blower case cracked in several places. Still runs but makes an odd noise probably due to the case being toast, I'm guessing.
Has one 4 wire connector and one 2 wire connector. If I leave it electrically disconnected will it throw a service light? If not which one should I leave disconnected? Want to leave it in place so it looks original.
Don't want to spend $200.00 + for a replacement.
Thanks, Dave.
Has one 4 wire connector and one 2 wire connector. If I leave it electrically disconnected will it throw a service light? If not which one should I leave disconnected? Want to leave it in place so it looks original.
Don't want to spend $200.00 + for a replacement.
Thanks, Dave.
07-08-2019, 05:52 PM
#2
Team Owner
Member Since: Sep 2001
Location: Athens AL
Posts: 59,645
Received 1,400 Likes
on
1,016 Posts
C7 of the Year - Unmodified Finalist 2021
C4 of Year Finalist (performance mods) 2019
Just disconnect the AIR? No it wont throw a code.
07-09-2019, 08:38 AM
#5
Team Owner
Member Since: Sep 2001
Location: Athens AL
Posts: 59,645
Received 1,400 Likes
on
1,016 Posts
C7 of the Year - Unmodified Finalist 2021
C4 of Year Finalist (performance mods) 2019
I'm asking if you just want to disconnect it and leave it there so it looks functional.
Yes just yank the plugs off. It wont do anything.
Yes just yank the plugs off. It wont do anything.