383 SC bin file needed
Thread Starter
Racer
Joined: Jul 2001
Posts: 359
Likes: 0
From: Russellville TN
St. Jude Donor '06
383 SC bin file needed
I would love to compare my bin file with someone else running a 383 SC 700R4 trans. I'm having idle surge problems (no vaccum leaks or TB Idle air adj issues) sine I bumped up my injectors to 30lbs. Also I would love to see how much timing you've taken out and at what rpms...ECM 165
Email address is: ourflat@jccomp.com
Any help is appreciated!
Frank :flag
[Modified by Corvette86, 10:01 PM 11/17/2002]
Email address is: ourflat@jccomp.com
Any help is appreciated!
Frank :flag
[Modified by Corvette86, 10:01 PM 11/17/2002]
Burning Brakes
Joined: Oct 2001
Posts: 1,033
Likes: 0
From: Tracy California
St. Jude Donor '05
Re: 383 SC bin file needed (Corvette86)
I'll be one soon, just haven't bolted it on yet. I do plan on using a DFI when I dp put it on though.
What kind of power are you making? Any 1/4mi timeslips? How much boost are you using?
KM
What kind of power are you making? Any 1/4mi timeslips? How much boost are you using?
KM
Thread Starter
Racer
Joined: Jul 2001
Posts: 359
Likes: 0
From: Russellville TN
St. Jude Donor '06
Re: 383 SC bin file needed (88-406)
I'm kicking out about 8 lbs of boost. Haven't dyno'd yet but hope to in the next week. Engine was built to 440 hp to flywheel before all the other goodies were installed. I suspect my rwhp will be between 450 to 500, maybe more:) It already runs like a bat out of %$#@. But it needs wband tuning on the dyno. I also plan to play with the timing too. This will give me an excellent chance to see if my engine combo is working as planned.
Frank :flag
Frank :flag
Burning Brakes
Joined: Oct 2001
Posts: 1,033
Likes: 0
From: Tracy California
St. Jude Donor '05
Re: 383 SC bin file needed (Corvette86)
Frank
Yuour setup sounds impressive. My engine put out 440HP N/A also. I was hoping to get closer to 500HP before the supercharger, so that's why I haven't put it on yet.
I need to tune mine a little more first. What heads,cam and intake are you running? I have a wideband o2 and the Diacom scanner. If you ever want to hook up I live in Tracy CA which isn't too far from you.
Kelvin
Yuour setup sounds impressive. My engine put out 440HP N/A also. I was hoping to get closer to 500HP before the supercharger, so that's why I haven't put it on yet.
I need to tune mine a little more first. What heads,cam and intake are you running? I have a wideband o2 and the Diacom scanner. If you ever want to hook up I live in Tracy CA which isn't too far from you.
Kelvin
