C4 headlight Timing off?
Drifting
Joined: Jan 2021
Posts: 1,315
Likes: 385
From: Northern California
Most likely you have one of the opening gears failing on the slow side, which is causing drag and more friction. When those plastic / nylon gears fail, they cram up the gearbox mechanism with plastic dust / powder which gums up the works also before complete failure.
https://www.corvetteforum.com/forums...post1604411483
I haven't seen your car in person so I could be wrong, but this is a likely cause.
https://www.corvetteforum.com/forums...post1604411483
I haven't seen your car in person so I could be wrong, but this is a likely cause.
Racer
Joined: Jun 2019
Posts: 441
Likes: 124
From: Lancaster S.C.
Replacement plastic gears are cheap.
Brass gears will last forever but much more expensive.
Job is a little complicated for a novice mechanic with not many tools.
I did the brass gears on my first car.
When the car I have now needs them I will just replace them with the plastic gears.
I figure the first pair lasted 25 years.
Brass gears will last forever but much more expensive.
Job is a little complicated for a novice mechanic with not many tools.
I did the brass gears on my first car.
When the car I have now needs them I will just replace them with the plastic gears.
I figure the first pair lasted 25 years.
