seat removel

Reply Subscribe

Thread Tools

Search this Thread

Feb 7, 2003 | 06:55 PM

bil-loc

Thread Starter

Navigator

Joined: Jan 2003

Posts: 9

Likes: 0

From: east haven ct

seat removel

I am getting new mounted seats never removed the seats before somebody please steer me in the right direction.

Feb 7, 2003 | 07:02 PM

don hall

Safety Car

Joined: Aug 2002

Posts: 3,842

Likes: 230

From: SANTA CRUZ CA

Re: seat removel (bil-loc)

Very basic. Four nuts to remove, and unplug electrical connectors beneath the seats. Move seats full back and full forward for access to the nuts.

Feb 7, 2003 | 08:27 PM

red-y

Drifting

Joined: Aug 2001

Posts: 1,407

Likes: 0

From: Houston TX

Re: seat removel (bil-loc)

First take the bottom seat cushion off. There is a spring in the middle of the front that just snaps out. Once the bottom cushion is off you can see the bolts that hold down the seat and the seat rail. In the very front of the rail there are caps that cover the bolts, This cap has a plastic pin in front that will pull straight out. The rest is obvious.
Good luck.. :seeya

[Modified by red-y, 7:28 PM 2/7/2003]

Feb 7, 2003 | 08:31 PM

StealDads67

Melting Slicks

Joined: Jan 2002

Posts: 2,784

Likes: 3

From: Atlanta GA

Re: seat removel (Oldman)

Quote:

Very basic. Four nuts to remove, and unplug electrical connectors beneath the seats. Move seats full back and full forward for access to the nuts.

:iagree: Nothing else needed to be said... Very simple job

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump