Rear convert lid doesn't lay flush?
Thread Starter
Racer
Joined: Mar 2003
Posts: 307
Likes: 0
From: Dover Oh
Rear convert lid doesn't lay flush?
I noticed when the top is down and the rear lid is latched down, it doesn't lay flush with the rest of the rear deck. Does anyone know if the latches can be adjusted to hold the lid down further?
Safety Car
Joined: Aug 2002
Posts: 3,842
Likes: 230
From: SANTA CRUZ CA
Re: Rear convert lid doesn't lay flush? (bheston)
The striker is fixed, but the latch mechanism is adjustable on each side. Spend a few moments analyzing the latch assembly, and you will see that it is a pretty simple fix.
To better understand the latch adjustment, it would be prudent to loosen all the nuts. Then the adjustment will be apparent.
[Modified by Oldman, 3:02 PM 3/18/2003]
[Modified by Oldman, 3:05 PM 3/18/2003]
To better understand the latch adjustment, it would be prudent to loosen all the nuts. Then the adjustment will be apparent.
[Modified by Oldman, 3:02 PM 3/18/2003]
[Modified by Oldman, 3:05 PM 3/18/2003]
