TPI settings
Thread Starter
Intermediate
Joined: Mar 2003
Posts: 28
Likes: 0
From: West Chester Pa
TPI settings
I removed the Throttle body from my 86 to clean it and install a new IAC valve, I got it all together and it started right up. But the idel was erratic between 9 and 13, I went under the hood with it running and I touched the TPI connector to see it it was loose or not the connector was ok but the TPI moved the two screws that hold it were loose, as I moved it the ideal went up and down,my question is how do you set it, do you need special tools or a meter ? :rolleyes:
Team Owner
Joined: Dec 2000
Posts: 90,675
Likes: 304
From: SE NY
Cruise-In II Veteran
Re: TPI settings (EBrown)
You need to first set base idle with the IAC pintel fully extended and then set the TPS base voltage value.
My method is on my site; it requires the use of a DMM to measure voltage at the TPS.
My method is on my site; it requires the use of a DMM to measure voltage at the TPS.
