LT4 Intake Bolts
Thread Starter
Racer
Joined: Jul 1999
Posts: 490
Likes: 7
From: Cincinnati OH
LT4 Intake Bolts
While preparing to reinstall the intake manifold, I realized that I forgot to note which holes the 3 studs came from versus the 9 bolts. :confused:
I think 1 came out of the drivers side, but the Helm shop manual doesn't have an illustration of the passenger side. Any pics or suggestions would be appreciated.
I think 1 came out of the drivers side, but the Helm shop manual doesn't have an illustration of the passenger side. Any pics or suggestions would be appreciated.
Pro
Joined: Nov 2002
Posts: 513
Likes: 0
From: Maple Grove MN
Re: LT4 Intake Bolts (Ominous C5)
Had the same issue over the weekend.... I believe that I have the studs in the correct place. 2 on the passenger side, one is the second hole in from the front of the car and the other one is the second in from the rear of the car. On the driver side it is the second hole from the rear of the car. :thumbs:
Racer
Joined: Jan 2001
Posts: 425
Likes: 0
From: Frederick MD
Re: LT4 Intake Bolts (Ominous C5)
On the driver's side I think GS919 means 2nd one in from the front, the AC/Alternator bracket attaches to an intake stud. Going from memory here.
[Modified by tdock, 10:11 AM 4/22/2003]
[Modified by tdock, 10:11 AM 4/22/2003]
