1987 Chevy Corvette Dyno!?!?!?!?
Team Owner
Joined: Sep 2001
Posts: 62,171
Likes: 1,735
From: Athens AL
C7 of the Year - Unmodified Finalist 2021
C4 of Year Finalist (performance mods) 2019
Re: 1987 Chevy Corvette Dyno!?!?!?!? (MadHandle8169)
Its not a 6 speed, its a 4+3 which you could call a 7 speed, it a 4 speed manual with a 3 speed overdrive attached.
Dyno numbers should be in the 200-210rwhp range completely stock. Torque numbers can vary but they tend to be in the 290-300rwtq range.
If you can launch, you can get high 13s @ around 98-100mph. Most people tend to get very low 14s.
Dyno numbers should be in the 200-210rwhp range completely stock. Torque numbers can vary but they tend to be in the 290-300rwtq range.
If you can launch, you can get high 13s @ around 98-100mph. Most people tend to get very low 14s.
Instructor
Joined: Apr 2003
Posts: 118
Likes: 0
From: santa maria ca
Re: 1987 Chevy Corvette Dyno!?!?!?!? (vader86)
my 87' not stock(some free home mods and exhaust). with 3.07's ran a 14.40 @97 in the heat of bakersfield with horrible timing in the middle of the day. it would do around a 14.00@100 now im sure of it in the same conditions.im not a bad driver but its easy to drive an auto.hooked up good to with a 2.05 ft. car ran around 200 allday with a low temp thermo and a low temp switch.those cars can be made to run 13's easily with home made mods and a good total exhaust system.
