Quick help?
Thread Starter
Burning Brakes
Joined: Jun 2002
Posts: 838
Likes: 0
From: Redding CA
Quick help?
Can someone tell me what I hook my boost line to for the boost guage, the directions are not to clear? Just to try we Teed off of the IAT sensor and are getting some boost just reving. Will this work? :confused: Anyone Please
[Modified by kabnvtt, 11:27 PM 6/15/2003]
[Modified by kabnvtt, 11:28 PM 6/15/2003]
[Modified by kabnvtt, 11:30 PM 6/15/2003]
[Modified by kabnvtt, 11:45 PM 6/16/2003]
[Modified by kabnvtt, 11:27 PM 6/15/2003]
[Modified by kabnvtt, 11:28 PM 6/15/2003]
[Modified by kabnvtt, 11:30 PM 6/15/2003]
[Modified by kabnvtt, 11:45 PM 6/16/2003]
Instructor
Joined: Mar 2003
Posts: 187
Likes: 0
From: Aztec NM
Re: Quick help? (kabnvtt)
If you hook the boost gauge there, you will not see the amount that the engine is really getting, except for at wide open throttle. You should tap into a source after the throttle plates. I used one of the fittings on the intake next to the PCV fitting. Procharger wants you to plug the PCV vaccuum source anyway, so you could use that one if you did away with your PCV.
Hope that helps.
:flag
:seeya
Save the Wave!
Hope that helps.
:flag
:seeya
Save the Wave!
