How do you read the codes
Thread Starter
Instructor
Joined: Nov 2000
Posts: 179
Likes: 2
From: Detroit Area
How do you read the codes
The 'Service Engine Soon' light is going on in my 95, every few days. The service manual shows two ways to read the codes. Using the 12 pin connector and the 16 pin connector. Which do I use?
Burning Brakes
Joined: May 1999
Posts: 1,189
Likes: 0
From: Lewisville Texas
Cruise-In II Veteran
Re: How do you read the codes (Indynick)
A '95 should have the 16-pin connector. Here's another reference for you, http://www.c4vettes.com/codes.htm
Racer
Joined: Apr 2003
Posts: 296
Likes: 0
From: Houston Texas
Re: How do you read the codes (Indynick)
If there is an autozone near by, they will pull the codes for free. My ses light comes on about every sixmonths (when I need to clean the K&N). Good luck :thumbs:
[Modified by speedracer1996, 6:33 AM 6/19/2003]
[Modified by speedracer1996, 6:33 AM 6/19/2003]
Safety Car
Joined: Aug 2002
Posts: 3,842
Likes: 230
From: SANTA CRUZ CA
