2-bar map sensor Part number?
Safety Car
Joined: Dec 1999
Posts: 4,691
Likes: 1
From: Framingham MA
Re: 2-bar map sensor Part number? (Ronnie_W)
You can't plug a 2 bar map sensor into your ECM and have it work. The stock map sensor outputs a signal that is from 0 - 5 volts, 0 psi is 5 volts, on a 2 bar map 0 psi is 2.5 volts. You could scale the tables in the ECM to account for the map sensor, but this is not for a novice. This is a lot of work because you have modify a good portion of the table because they use the map or load for a lot of calculations.
BTW The Gm part number for a 2 bar map is 16009886
BTW The Gm part number for a 2 bar map is 16009886
Thread Starter
Pro
Joined: Jan 2003
Posts: 638
Likes: 23
From: St. Johns Fl
Re: 2-bar map sensor Part number? (dgoodhue)
I have a speedpro (now FAST) computer. I can choose 1,2 or 3 bar maps. Thanks for the part number?
[Modified by Ronnie_W, 2:17 PM 6/27/2003]
[Modified by Ronnie_W, 2:17 PM 6/27/2003]
