jacking question
Thread Starter
Safety Car
Joined: Jul 2002
Posts: 4,548
Likes: 3
From: SCMR Rat Pack'r Charter Member, Inland Empire Chapter
jacking question
I did a search and couldnt find an answer to this specific question....can you jack the back end of a C4 with a floor jack under the differential? I hate jacking it one corner at a time to put jack stands at the factory jacking points. It just looks like that much flex is gonna break something.
Team Owner
Joined: Jan 2003
Posts: 20,342
Likes: 264
From: Summerland B.C. Canada
Re: jacking question (DarkHalo)
Yes, but you need to buy or build an adapter for your floor jack. It's tall and narrow to fit between the exhaust. Can't remember who makes it but a search will quickly find all the posts about it. And i'm sure it won't be long before someone with a memory chimes in. :cheers:
Advanced
Joined: Feb 2003
Posts: 97
Likes: 0
From: Richmond CA
Re: jacking question (AGENT 86)
i bought this one....
what a life saver!!!!
http://www.corvettegadgetman.com/products3.html
I now jack up the rear using the above item, and place stands under. Then slide my jack under the front cross-member in the middle and jack the front up.
what a life saver!!!!
http://www.corvettegadgetman.com/products3.html
I now jack up the rear using the above item, and place stands under. Then slide my jack under the front cross-member in the middle and jack the front up.
Instructor
Joined: Jan 2003
Posts: 196
Likes: 0
From: harvest al
Re: jacking question (gab)
I understand you can also jack up the rear by placing about a 16 inch piece of 4 X 4 right between the hinges of the spare tire carrier. This assume the spare is in there and has air. The 4 X 4 push against the spare which is right up against a frame cross member. Supposedly won't damage anything.
Team Owner
Joined: Dec 2000
Posts: 21,094
Likes: 282
From: Phila., PA burbs
Re: jacking question (sundbergjc)
I understand you can also jack up the rear by placing about a 16 inch piece of 4 X 4 right between the hinges of the spare tire carrier. This assume the spare is in there and has air. The 4 X 4 push against the spare which is right up against a frame cross member. Supposedly won't damage anything.
