Aux Fan switch Part ##
Thread Starter
Racer
Joined: Apr 2003
Posts: 280
Likes: 0
From: edmonton ab
Aux Fan switch Part ##
we are basically looking for a fan switch that closes @ 200'f and open @ 185'f..must have 3/8" NP thread, the connector may vary....
only jobber part # are required.....
the part # 's from eklers, madvet, only corresponse to thier inventory and would not allows us to buy these parts from regular auto parts store..FYI these switches mimik the OEM closing @ 224'f & closing 204'f.. i have one :mad
please jump in with comments...
only jobber part # are required.....
the part # 's from eklers, madvet, only corresponse to thier inventory and would not allows us to buy these parts from regular auto parts store..FYI these switches mimik the OEM closing @ 224'f & closing 204'f.. i have one :mad
please jump in with comments...
Melting Slicks
Joined: Feb 2003
Posts: 2,677
Likes: 811
From: Saskatoon Sask.
Re: Aux Fan switch Part ## (vettek50)
If you have some spare time, go to NAPA and they should have a book showing pictures and specifications of a multitude of switches, relays, etc. It is divided into different sections and there is a picture for each item. That is how I found the part # for the Bosch cold start injector on my 87.
