code 36
Thread Starter
Le Mans Master
Joined: Jul 2003
Posts: 7,501
Likes: 1
From: Maine
code 36
I was haing a code 33 problem with my 88... i replaced the Maf, both relays and finally the ECM...which i thought solved my problem.... after driving about 300 miles over a week or so the ses light came back on.... when i pulled the codes it was a 36... i checked the connections all was fine... i reseated the ecm connections and the problem went away ... well after a few days of driving its back..... any ideas or help would be great! ....also when i let off the gas petal the car drops idle just for a second which just started happening after i replaced all the parts the first time...
Safety Car
Joined: Aug 2002
Posts: 3,842
Likes: 230
From: SANTA CRUZ CA
Re: code 36 (jman1)
This link may be "old" stuff, but scroll to the cause of 36, and then scroll some more to the remedies for 36. Hope it helps................http://www.c4vettes.com/ecm.htm
Safety Car
Joined: Dec 2000
Posts: 3,767
Likes: 5
From: Jacksonville Fl
Re: code 36 (Oldman)
You need new MAF burnoff relays:
http://www.troublecodes.net/GM/86-88_578.shtml
[Modified by BBA, 7:05 PM 7/23/2003]
36 MAF sensor burn-off voltage was missing. Check MAF sensor burn-off relay and terminal "D" on MAF.
[Modified by BBA, 7:05 PM 7/23/2003]
