Electrical help needed
Thread Starter
Instructor
Joined: Oct 2003
Posts: 198
Likes: 0
From: Dallas tx
Electrical help needed
After reinstalling a heater core, i am finding that I have 6 wiring harnesses, all 10pin that I can't figure out which goes to which. I know, i should have labeled them, but i really thought that by looking inside the connectors I could just mate up the ones with the same pin configuration. But none of them seem to mate up like this. The service manual is no help, and I don't have the wiring diagram manual. Anyone have any suggestions?
Thread Starter
Instructor
Joined: Oct 2003
Posts: 198
Likes: 0
From: Dallas tx
Re: Electrical help needed (Ras119)
Well, I guess never mind. I went back and started to match like wires with like wires. ITs weird that the connectors don't have all the same pin configurations. But needless to say, the car started right up :hurray: and the heater even blows... :party: :flag ...
Thread Starter
Instructor
Joined: Oct 2003
Posts: 198
Likes: 0
From: Dallas tx
Re: Electrical help needed (Ski2Tee)
So many little projects. Funny thing is, as soon as i got this car, my pool turned green from neglect, and I have weeds in the yard, which is overgrown...but my car doesnt have a speck of dirt on it. My girlfriend is getting kinda :mad .
So, now that i got the lovely new heater core in, and the car running, it doesnt seem to want to blow hot air. I am asuming the door is stuck closed, I'll have to do some trouble shooting in the manual. I'm not throwing any a/c codes, maybe it will resolve itself. :confused:
So, now that i got the lovely new heater core in, and the car running, it doesnt seem to want to blow hot air. I am asuming the door is stuck closed, I'll have to do some trouble shooting in the manual. I'm not throwing any a/c codes, maybe it will resolve itself. :confused:
