power window switch/wire sequence - passenger 96
Thread Starter
4th Gear
Joined: May 2004
Posts: 4
Likes: 0
From: dallas tx
power window switch/wire sequence - passenger 96
After rediculing me for not marking wires correctly on disassembly -
Does anyone have the wire layout to the passenger side window switch for 96
vette?
looking at back / top of switch
|----------------------- |
| capacitor -- 1 | | <- metal clip
| here -- 2 |
| -- 3 |
| -- 4 |
| -- 5 |
| -- 6 |
_____________
I had hand scratched
1 = brown
2 = black
3 = blue
4 = blue/white
5 = gray
6 = orange
But no functioning window. If anyone with an LT1 has a second, the switch pops out of panel in a second. Hopefully you can do a better job of writing down the sequence than I did.
Thanks in advance.
Steve in Dallas
Does anyone have the wire layout to the passenger side window switch for 96
vette?
looking at back / top of switch
|----------------------- |
| capacitor -- 1 | | <- metal clip
| here -- 2 |
| -- 3 |
| -- 4 |
| -- 5 |
| -- 6 |
_____________
I had hand scratched
1 = brown
2 = black
3 = blue
4 = blue/white
5 = gray
6 = orange
But no functioning window. If anyone with an LT1 has a second, the switch pops out of panel in a second. Hopefully you can do a better job of writing down the sequence than I did.
Thanks in advance.
Steve in Dallas
