OPTI-SPARK HELP
Thread Starter
Burning Brakes
Joined: Feb 2002
Posts: 825
Likes: 14
From: wadsworth ohio
OPTI-SPARK HELP
What do I have to loosen to get the spark plug wires out on the drivers side?I'm right down to the opti but wanted to change wires first before removing opti. :banghead:
Race Director
Joined: Feb 2003
Posts: 11,672
Likes: 20
From: Lake Wylie SC
Re: OPTI-SPARK HELP (derv3tt3)
Check out the tools section and look for C4 tech tips. I have large hands so I removed the power steering unit and this helped with clearances. I also moved the ASR unit out of the way. Here is an article I wrote that might be good for you to read. I know it's too long. https://www.corvetteforum.com/techti...=231&TopicID=2
[Modified by Strick, 5:33 PM 5/23/2004]
[Modified by Strick, 5:33 PM 5/23/2004]
Large Impressive Member
Joined: Jul 2003
Posts: 65,811
Likes: 71
From: Good health is merely the slowest possible rate at which one can die
St. Jude Donor '04-'05-'06-'07
Re: OPTI-SPARK HELP (derv3tt3)
This probably won't help you now but there's an area where the left side wires are all squeezed between the power steering and the accessory bracket. Recently while my bracket was off I did a bit of grinding on it in that area and it made the wires go thru there SO much easier when reassembling my engine. I didn't have to remove that much to make a big difference and it did nothing to compromise the integrity of the bracket.
