Batwing bushing query
Thread Starter
Large Impressive Member
Joined: Jul 2003
Posts: 65,811
Likes: 71
From: Good health is merely the slowest possible rate at which one can die
St. Jude Donor '04-'05-'06-'07
Batwing bushing query
I just pressed the rubber bushings out of a 44 batwing that I'm preparing for installation and I noticed the poly bushings (Energy Suspension) don't want to go into the steel sleeves that are still in the bat wing. I assume I need to remove and discard them too but just wanted to make sure before I did. No instructions included, of course.... 
Thread Starter
Large Impressive Member
Joined: Jul 2003
Posts: 65,811
Likes: 71
From: Good health is merely the slowest possible rate at which one can die
St. Jude Donor '04-'05-'06-'07
Originally Posted by Midnight 85
If the 44 is like the 36 then yes you can discard the sleeves.
Team Owner
Joined: Sep 2003
Posts: 20,179
Likes: 673
From: Freedom is never more than one generation away from extinction.
St. Jude '03 thru '24
IMHO... have the bushings turned down to fit inside the sleeves. I cut the sleeves out and could have saved a lot of time.
Which ever way you go, you'll like the way it drives!
-JRC-
Which ever way you go, you'll like the way it drives!
-JRC-
