Throttle body linkage question.

Reply Subscribe

Thread Tools

Search this Thread

Oct 9, 2004 | 12:16 PM

KENS80V

Thread Starter

Melting Slicks

Joined: Aug 2004

Posts: 2,928

Likes: 229

From: Oakbank Manitoba

Throttle body linkage question.

What's the difference in linkages between an automatic and manual equipped setup on the throttle body of a 89/91 car? I just bought a complete setup off EBAY but it was from a six speed. I'm installing this on a automatic 700/R4 (1980) Corvette.
Hope I don't have to buy another throttle body from an automatic. Can anyone help?

Ken

Oct 9, 2004 | 12:32 PM

skateparkdave

Melting Slicks

Joined: May 2004

Posts: 2,524

Likes: 10

From: Lufkin Texas

St. Jude Donor '05-'06

Not sure if any difference but I do know you'll need a place to hook the TV cable to. If the manual linkage doesn't have that you'll need to come up with something.

Oct 9, 2004 | 12:50 PM

KENS80V

Thread Starter

Melting Slicks

Joined: Aug 2004

Posts: 2,928

Likes: 229

From: Oakbank Manitoba

That is my question skateparkdave.....does the manual version have the arm required for the TV cable or is it missing all together.

Anybody!

Oct 9, 2004 | 02:03 PM

CFI-EFI

Race Director

Joined: Sep 2000

Posts: 17,298

Likes: 33

From: The Top of Utah

My April 1989 Corvette parts book only goes to '89 on the throttle body. There is no distinction between transmissions for 1989. For that year, they are all 17089023.

RACE ON!!!

Oct 9, 2004 | 03:56 PM

skateparkdave

Melting Slicks

Joined: May 2004

Posts: 2,524

Likes: 10

From: Lufkin Texas

St. Jude Donor '05-'06

Quote:

Originally Posted by KENS80V

That is my question skateparkdave.....does the manual version have the arm required for the TV cable or is it missing all together.

Anybody!

I did a little research and as CFI-EFI has indicated, the literature I have also shows no difference. I think the hole for the TV cable is there on the TB linkage with a manual, just not used.