When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
BlownVette,
Sounds like a nice setup. Wanna give us a rundown?
As far as ATI goes, The base 600x unit is worthless. Every person I know with one has had to send it off to have it rebuilt (some a few times) within a year!!! The do not make near the boost that they claim they do. a 9# kit might get you about 2-3#.
As far as the D-1 series, I do not know nor have much experience with these, so I will not comment.
If you do a search on here as well as Yahoo for ATI, you will find a few horror stories about these units.
The do not make near the boost that they claim they do. a 9# kit might get you about 2-3#.
[/color]
2FST4U speaks the truth. I can't get more than 3 lbs (on a good day) from my ATI. I suppose I have been real lucky and not had to rebuild the 600 in the three years I have had it installed.
Go with a Vortech S trim unit. Its probably one of the best all around street blowers available.
I used to own a paxton and it was ok. But require alot more care and attention to stay that way. I sold it to a guy and he had to get it rebuilt shortly thereafter.