What model Magnaflow muffler?
Thread Starter
Team Owner
Joined: Apr 2001
Posts: 22,267
Likes: 3
From: Dallas TX
What model Magnaflow muffler?
What model magnaflow mufflers should I get? I'm putting on Hooker Long Tubes as I type 
. My local shop says $800 to install exhaust. Trying to get as many parts ahead of time to lower the cost that I can.
3" in and dual 2.5" ... or 3" in / 3" out ?
. My local shop says $800 to install exhaust. Trying to get as many parts ahead of time to lower the cost that I can.3" in and dual 2.5" ... or 3" in / 3" out ?
Thread Starter
Team Owner
Joined: Apr 2001
Posts: 22,267
Likes: 3
From: Dallas TX
Originally Posted by scofolo
is the shop installing the headers for that price too
. I can do just about anything minus making mandrel bent pipe, haha.BTW, i found my tips (Magnaflow 35169 :
) online for $60 each instead of $90 (list) that all the places around here are asking. Trying to find the mufflers local as well to save some more cash... so need to figure out which ones to get. Here's a link to all offered by magnaflow: http://www.magnaflow.com/02product/m...iv_al_oval.aspI don't know what size muffler to get. Anyone?
Last edited by GlockLT4; Nov 9, 2004 at 10:50 PM.
Burning Brakes
Joined: Nov 2003
Posts: 844
Likes: 0
From: Cape Cod Ma
What are your mods. Any? without mods you should do a 2.5" if true duells. Are you doing that or are you goin 2.5"s into a 3" intermediate to the 2.5"-y pipe out back. Or the 3" duell's. I would do the 3" duells with the 3" single in-out in the back. THe 3" would be extra big for future modifications.
Thread Starter
Team Owner
Joined: Apr 2001
Posts: 22,267
Likes: 3
From: Dallas TX
Originally Posted by redfast
What are your mods. Any? without mods you should do a 2.5" if true duells. Are you doing that or are you goin 2.5"s into a 3" intermediate to the 2.5"-y pipe out back. Or the 3" duell's. I would do the 3" duells with the 3" single in-out in the back. THe 3" would be extra big for future modifications.
LT4 with cam (heads in future) and headers. Going 3". Just need to know the model number for the 3in/3out . I think that we need offcenter/center, right?
