superram porting
Thread Starter
Instructor
Joined: Sep 2004
Posts: 210
Likes: 0
From: peoria il
superram porting
i just bought a superram setup from tjwong on monday. can i work on porting it myself? do i need to port it, i don't want to put it on without porting it, if porting it will make a big enough difference? can i port it with a demel? and what addaptor part should i use, and grit sandpaper?thanks.........
Heel & Toe
Joined: May 2002
Posts: 17
Likes: 0
From: Monroe la
You can use a Dremel but stay tuned for a long sit. It doesn't have the torque that a die grinder has. Save yourself a lot of time, get an air compressor and a straight and a angled die grinder. I also did a google search for a porting and polishing set and it had everything that I needed for years.
Rob
Rob
Race Director
Joined: Feb 1999
Posts: 12,772
Likes: 17
From: Indianapolis IN
