Looking for SWEET exhaust tips
Thread Starter
Melting Slicks
Joined: Jan 2002
Posts: 3,293
Likes: 79
From: Jackson MI
Looking for SWEET exhaust tips
I've decided to go with muffler eliminators and I need some nice looking tips to go on them. I'd like to have dual tips on each side. And I want to keep the 2.75" or even 3" inlet to them.
Does anybody know where I can get a set like this for somewhat of a reasonable price?
Does anybody know where I can get a set like this for somewhat of a reasonable price?
Race Director
Joined: Jan 2004
Posts: 18,727
Likes: 711
From: Bergen County, NJ
Nice tips are expensive.
These are the nicest tips, IMO.
These tips came with my Borla mufflers, but they are way too expensive to buy alone.
http://shop.ivalueinternet.com/bigex...uct_id/887.htm
These are the nicest tips, IMO.
These tips came with my Borla mufflers, but they are way too expensive to buy alone.
http://shop.ivalueinternet.com/bigex...uct_id/887.htm
Advanced
Joined: Jan 2001
Posts: 65
Likes: 0
From: eau claire, wi. usa
I am not sure what reasonable price is -if you like the look, you may have to pay the price. There are options of chrome or stainless steel - Go online to ecklers.com and have a look, they show several styles.
Thread Starter
Melting Slicks
Joined: Jan 2002
Posts: 3,293
Likes: 79
From: Jackson MI
Originally Posted by Wayne88
Nice tips are expensive.
These are the nicest tips, IMO.
These tips came with my Borla mufflers, but they are way too expensive to buy alone.
http://shop.ivalueinternet.com/bigex...uct_id/887.htm
These are the nicest tips, IMO.
These tips came with my Borla mufflers, but they are way too expensive to buy alone.
http://shop.ivalueinternet.com/bigex...uct_id/887.htm
I've seen these and I like them, but they don't have then with a 3" inlet. My price range is under $100. I figure for that price I can make some nice stainless ones myself and pollish then up really nice.
Maybe something like these with 45 cuts on the end
Or I could make a set of tips like these for $30 or so but I'd prefer the dual outlets
Last edited by mn_vette; Dec 8, 2004 at 02:50 PM.
Burning Brakes
Joined: Nov 2001
Posts: 812
Likes: 1
From: Sherman Texas
www.vibrantperformance.com
Try these guys.. I have some of their tips. They are not quite as nice as Corsa, but they are much cheaper..
Chris
Try these guys.. I have some of their tips. They are not quite as nice as Corsa, but they are much cheaper..
Chris
Race Director
Joined: Feb 2003
Posts: 16,475
Likes: 270
From: Kingman AZ
Cruise-In VII Veteran
Cruise-In VIII
St. Jude Donor '06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16
Go to the www.magnaflow.com web site. Their site is pretty cool as you can listen to how their products sound on the video clips. They ain't cheap though!
Thread Starter
Melting Slicks
Joined: Jan 2002
Posts: 3,293
Likes: 79
From: Jackson MI
Originally Posted by corvetteronw
Go to the www.magnaflow.com web site. Their site is pretty cool as you can listen to how their products sound on the video clips. They ain't cheap though!
Those would be perfect, except they are $230 a pair, maybe I'll pass.
Maybe I'll just get a pair of these.
Last edited by mn_vette; Dec 9, 2004 at 02:41 PM.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski