Hooker LTs going on tonight!!!
Merry Christmas everyone. 
Melting Slicks
Joined: May 2004
Posts: 2,524
Likes: 10
From: Lufkin Texas
St. Jude Donor '05-'06
I'll be getting to the install of my hookers soon. Gonna drive the Vette to see family tommorrow so I wont be doing it on Christmas eve. Let us know what you run in to. 
Have fun and Merry X-mas.
Have fun and Merry X-mas.
Burning Brakes
Joined: Feb 2003
Posts: 1,144
Likes: 18
From: Panhandle FL
I wish you the best, but this isn't a 1 evening job. As far as tips, when you get the old exhaust off, turn around the motor mount bolts. Also I cut a 7/16 wrench in half so it would have enough room to turn next to the firewall. 
Burning Brakes
Joined: Nov 2004
Posts: 1,057
Likes: 0
From: Warren Ohio
Merry Christmas!
I just installed a set of 2151's a couple of weeks ago. When you do the passenger-side install, start with #8...it's a real pain...very tight working back there. I had to come at it from the bottom with a crow's foot, swivel, and extensions.
Other than that, and reversing the motor mount bolts, it's a pretty straight-forward installation. They made a tremendous difference...you'll love them!
Merry Christmas, all!
Other than that, and reversing the motor mount bolts, it's a pretty straight-forward installation. They made a tremendous difference...you'll love them!
Merry Christmas, all!
