how do I remove the battery?
Thread Starter
Drifting
Joined: Aug 2004
Posts: 1,830
Likes: 1
From: atlanta Georgia
how do I remove the battery?
do I take the innder fenger well out?
or the side panel?
if so how do I take it out...
when I put it back in do i need to align it or just bolt it in?
thanks your friend
Sean
or the side panel?
if so how do I take it out...
when I put it back in do i need to align it or just bolt it in?
thanks your friend
Sean
Melting Slicks
Joined: Dec 2000
Posts: 2,719
Likes: 60
From: Fremont Oh
Hi Rebull,
There are about 4 Torx type scres lining the fender well and 2 10 mm bolts on on the top near the door jam.
f youlook in the seam near the rocker panel there is anoter 10 mm bolt there as well. You can slide an open end wrench in and loosen it up, you shouldn't have o pull it all the ay out but if you loosen it it should allow you enough room to pull the battery out.
Mo
There are about 4 Torx type scres lining the fender well and 2 10 mm bolts on on the top near the door jam.
f youlook in the seam near the rocker panel there is anoter 10 mm bolt there as well. You can slide an open end wrench in and loosen it up, you shouldn't have o pull it all the ay out but if you loosen it it should allow you enough room to pull the battery out.
Mo
Team Owner
Joined: Sep 2003
Posts: 20,179
Likes: 673
From: Freedom is never more than one generation away from extinction.
St. Jude '03 thru '24
Originally Posted by Mo_Bandy
There are about 4 Torx type scres lining the fender well and 2 10 mm bolts on on the top near the door jam.
Melting Slicks
Joined: Apr 2002
Posts: 2,118
Likes: 0
From: St. Charles, MO Route 66 Corvette Club
Redbull: This project really looks much worse BEFORE you do it. It is really not that bad! Just a note that as you reassemble the side panel, take the time to adjust it so that the spacing between it and the door is the same as the spacing between the hood edge and the door. This will prevent the door from rubbing the panel when you open the door.
SAM
SAM
Pro
Joined: Nov 2004
Posts: 698
Likes: 1
From: louseyville Ky
Originally Posted by Sam Lam
Redbull: This project really looks much worse BEFORE you do it. It is really not that bad! Just a note that as you reassemble the side panel, take the time to adjust it so that the spacing between it and the door is the same as the spacing between the hood edge and the door. This will prevent the door from rubbing the panel when you open the door.
SAM
SAM
The previous owner did not do this. It takes about 2 minutes to line it up right. This is time well spent. Easy project.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
5 Best & 5 Worst Corvette Daily Drivers
Joe Kucinski
The Headlights of Every Corvette Generation Explained
Joe Kucinski
5 Best & 5 Most Overrated Corvette Track Packages of All Time!
Joe Kucinski
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
