FS: 89 383 Convertible fully built toy car + Hardtop $6200 - Denver
#1
Burning Brakes
Thread Starter
89 383 Convertible fully built toy car + (SOLD)Hardtop $6200 - Denver
UPDATE: HARDTOP SOLD
UPDATE2: VETTE SALE PENDING
132,400 miles
ENTIRE driveline replaced since 121,000 miles
383 built by Jeb Burnett (Corvette Forum) with Lingenfelter Super Ram intake
Balanced and Blueprinted
Forged Pistons
Cast Crank
1.6 Roller Rockers
Custom cam, similar to ZZ9
High Flow oil pump
Hi-Cap Moroso Oil pan
McLeod Hi-Torque starter
Supplemental Oil cooler with 170 degree thermostat
Hooker Supercomp long tube ceramic coated headers, Magnaflow mufflers and new EPA stamped cat.
Dana36 Rear-end cryo’d and blueprinted by Jeb Burnett
700r4 built by Hartman High Performance (Syclone/Typhoon forum)
Billet 9/11 torque converter with 3200 stall by TCS
B&M Megashifter
Supplemental Transmission Fluid Cooler and Temp Gage
Tuning by Ed Wright at Fastchip
Roughly 12,000 miles on engine, transmission u-joints, rear-end, Uprated Cooling system, Poly-graphite bushings, coolers for oil and transmission fluid, remote oil filter
C5 front brakes, 92 Camaro uprated master cylinder
3.52 rear-gears + Dakota Digital speedo corrector
Griffin Radiator, high-flow water pump and Evans NPG non-aqueous coolant, kit from www.evanscoolant.com
Redline f-type transmission and Heavy Shockproof gear lube
Extras:
Seperate Seasoned, Numbers-matching block
Factory Service Manual
OBD1 Auto X-ray
Spare tire and hanger (removed from vehicle)
Newly replaced headlight motor gears
Pending SALE SEPERATE SALE: Dark Red Hardtop with all brackets and hat shelf carpet - 9/10 condition, local pickup only, for $1200 - price of Vette will drop to $5000
Vehicle is in Denver, Colorado
DOES NOT PASS DENVER METRO AREA EMISSIONS - Vehicle has a new EPA compliant CAT fitted and Cam Profile was selected to pass emissions, and did so until 2011. Vehicle is healthy, rumor is that they lowered the HC limits. It burned 2.94 HC, 13.1174 CO, 484 CO2, and 0.8025 NOx - It needs a line from the AIR pump to the Cat to pass the visual inspection. Purchase by someone in the Denver Metro Area will include forms stating the sale occurs with a non-emissions compliant vehicle. This is only relevant for sales in the following counties:
UPDATE2: VETTE SALE PENDING
132,400 miles
ENTIRE driveline replaced since 121,000 miles
383 built by Jeb Burnett (Corvette Forum) with Lingenfelter Super Ram intake
Balanced and Blueprinted
Forged Pistons
Cast Crank
1.6 Roller Rockers
Custom cam, similar to ZZ9
High Flow oil pump
Hi-Cap Moroso Oil pan
McLeod Hi-Torque starter
Supplemental Oil cooler with 170 degree thermostat
Hooker Supercomp long tube ceramic coated headers, Magnaflow mufflers and new EPA stamped cat.
Dana36 Rear-end cryo’d and blueprinted by Jeb Burnett
700r4 built by Hartman High Performance (Syclone/Typhoon forum)
Billet 9/11 torque converter with 3200 stall by TCS
B&M Megashifter
Supplemental Transmission Fluid Cooler and Temp Gage
Tuning by Ed Wright at Fastchip
Roughly 12,000 miles on engine, transmission u-joints, rear-end, Uprated Cooling system, Poly-graphite bushings, coolers for oil and transmission fluid, remote oil filter
C5 front brakes, 92 Camaro uprated master cylinder
3.52 rear-gears + Dakota Digital speedo corrector
Griffin Radiator, high-flow water pump and Evans NPG non-aqueous coolant, kit from www.evanscoolant.com
Redline f-type transmission and Heavy Shockproof gear lube
Extras:
Seperate Seasoned, Numbers-matching block
Factory Service Manual
OBD1 Auto X-ray
Spare tire and hanger (removed from vehicle)
Newly replaced headlight motor gears
Pending SALE SEPERATE SALE: Dark Red Hardtop with all brackets and hat shelf carpet - 9/10 condition, local pickup only, for $1200 - price of Vette will drop to $5000
Vehicle is in Denver, Colorado
DOES NOT PASS DENVER METRO AREA EMISSIONS - Vehicle has a new EPA compliant CAT fitted and Cam Profile was selected to pass emissions, and did so until 2011. Vehicle is healthy, rumor is that they lowered the HC limits. It burned 2.94 HC, 13.1174 CO, 484 CO2, and 0.8025 NOx - It needs a line from the AIR pump to the Cat to pass the visual inspection. Purchase by someone in the Denver Metro Area will include forms stating the sale occurs with a non-emissions compliant vehicle. This is only relevant for sales in the following counties:
- Boulder
- Broomfield
- Denver
- Douglas
- Jefferson
- Portions of Adams
- Portions of Arapahoe
- Portion of Larimer
- Portions of Weld
Last edited by RocketSled; 05-05-2019 at 03:53 PM. Reason: Revised Listing
#3
Instructor
Nice! What are the street manners like on this car?
Last edited by BubbaKahuna; 04-12-2019 at 04:57 PM. Reason: Nice!
#4
Burning Brakes
Thread Starter
1/4 mile times need to be prefaced with the Altitude. Street tires, at Bandimere, it turns sub 2 second 60 foot times, and has turned high 13's. It's a snapshot of it's time, not as fast as a lot of stuff out there, but it was built for torque and is a really fun car to mess around in.
Expect mid to high 12's at Sealevel, traction limited.
Street Manners are really good. The 9/11 torque converter was the trick at the time to raise the stall to 3200 rpm, but not feel sloppy on the street. Additional cooling was added to combat the elevated fluid temps you'd see in stop and go traffic. It's not idiot-proof (watch the tranny temps), but aside from that, it'll cool and run and start and race dependably.
Expect mid to high 12's at Sealevel, traction limited.
Street Manners are really good. The 9/11 torque converter was the trick at the time to raise the stall to 3200 rpm, but not feel sloppy on the street. Additional cooling was added to combat the elevated fluid temps you'd see in stop and go traffic. It's not idiot-proof (watch the tranny temps), but aside from that, it'll cool and run and start and race dependably.
#5
Burning Brakes
Thread Starter
The Initial Post was missing some detail (car was on the lift, in the dark) He're some more interior shots and startup. It always start on the second turn of the key.
#6
Hi! Was wondering if you would be interested in a part trade? I have a 93 six speed roadster with Dana 44 and 345 gears. Car looks and runs good. Lot of miles. 156k. Also have a 85 coupe looks and runs good with 94k. It's the 4-3 transmission with Dana 44 with 307 gears. Would be throwing some cash your way as well??? Let me know if you might be interested. I can send pics if you want. Thanks.
Gary
Gary
#7
Burning Brakes
Thread Starter
Hi! Was wondering if you would be interested in a part trade? I have a 93 six speed roadster with Dana 44 and 345 gears. Car looks and runs good. Lot of miles. 156k. Also have a 85 coupe looks and runs good with 94k. It's the 4-3 transmission with Dana 44 with 307 gears. Would be throwing some cash your way as well??? Let me know if you might be interested. I can send pics if you want. Thanks.
Gary
Gary
#16
Burning Brakes
Thread Starter
#18
Burning Brakes
Thread Starter