Nitrous Kit help
Pro
Joined: Jun 2005
Posts: 593
Likes: 1
Where is ground for the relay and which color wire of TPS was used ?
Originally Posted by JPBabyRange
Ok- here is how I wired my 5177 kit, MSD Window Switch, and Dynotune TPS.(THANKS TO NXRICKY) The window switch comes on and cycles thru, reads my rpms and seems to be working fine. The TPS is set where the light comes on when I hit WOT.
My problem is the solenoids are not working at all. We even tested the lead wire off the relay and it had no voltage coming out of it at all. Anybody know what the problem could be?
My problem is the solenoids are not working at all. We even tested the lead wire off the relay and it had no voltage coming out of it at all. Anybody know what the problem could be?
