I almost got in the 9 sunday with a D1
#1
Drifting
Thread Starter
Member Since: Aug 2004
Location: silver creek ga
Posts: 1,561
Likes: 0
Received 0 Likes
on
0 Posts
I almost got in the 9 sunday with a D1
Well I almost got into the 9s. my first run was a 10.06 but i lifted at the end ony traped 130.85 60ft was 1.471 1/8 was a 6.44 at 108.51 but it got loose at the end so got back in line to make another run and they shut the track down for about 2 hours for a wreck well it was dark by this time made another run spun bad 60 ft was a 1.512 1/8 was a 6.463 at 108.43 and the 1/4 at 10.06 at 137.57 then it was time to close the track so I think I will be in the 9s if I go back
Thanks Modern Day Muscle Car
Thanks Modern Day Muscle Car
#3
Le Mans Master
Member Since: Oct 2005
Location: Metro Detroit Michigan
Posts: 7,078
Received 1,817 Likes
on
1,085 Posts
Didn't any one tell you them centrifugals are no good?
#12
Drifting
Thread Starter
Member Since: Aug 2004
Location: silver creek ga
Posts: 1,561
Likes: 0
Received 0 Likes
on
0 Posts
Here is my set up
forged motor stock cubes
Afr heads 225
mdmc cam
D 1 single innercooler 15 lbs boost
Rosslier tran and yes it a auto not much stall its a real tight convertor
50 shot of nitrous thats what makes my convertor flash
all harden shafts
oh yeah ccw wheel package with 28 in slicks
I got video shot me a email addres and I will send it to ya
forged motor stock cubes
Afr heads 225
mdmc cam
D 1 single innercooler 15 lbs boost
Rosslier tran and yes it a auto not much stall its a real tight convertor
50 shot of nitrous thats what makes my convertor flash
all harden shafts
oh yeah ccw wheel package with 28 in slicks
I got video shot me a email addres and I will send it to ya
#13
Premium Supporting Vendor
Originally Posted by racerrob333
Here is my set up
forged motor stock cubes
Afr heads 225
mdmc cam
D 1 single innercooler 15 lbs boost
Rosslier tran and yes it a auto not much stall its a real tight convertor
50 shot of nitrous thats what makes my convertor flash
all harden shafts
oh yeah ccw wheel package with 28 in slicks
I got video shot me a email addres and I will send it to ya
forged motor stock cubes
Afr heads 225
mdmc cam
D 1 single innercooler 15 lbs boost
Rosslier tran and yes it a auto not much stall its a real tight convertor
50 shot of nitrous thats what makes my convertor flash
all harden shafts
oh yeah ccw wheel package with 28 in slicks
I got video shot me a email addres and I will send it to ya
Good numbers...
#16
Instructor
Member Since: Jul 2002
Location: Atlanta ga
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
vid doesnt work for me...i get some text gibberish.
Get rossler to send you a t-brake....full electronic shifts...and it will stall big time when the boost hits the converter. Then you keep your tight stall and lose the weight of the spray
Get rossler to send you a t-brake....full electronic shifts...and it will stall big time when the boost hits the converter. Then you keep your tight stall and lose the weight of the spray
#19
Drifting
Thread Starter
Member Since: Aug 2004
Location: silver creek ga
Posts: 1,561
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by cablebandit
vid doesnt work for me...i get some text gibberish.
Get rossler to send you a t-brake....full electronic shifts...and it will stall big time when the boost hits the converter. Then you keep your tight stall and lose the weight of the spray
Get rossler to send you a t-brake....full electronic shifts...and it will stall big time when the boost hits the converter. Then you keep your tight stall and lose the weight of the spray
#20
Drifting
Thread Starter
Member Since: Aug 2004
Location: silver creek ga
Posts: 1,561
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BLOWNZO6
Here is the video
http://www.usionline.net/robsteelesept2006.wmv
EDIT... MAN it is a convertible even.. NICE.
Good video.
http://www.usionline.net/robsteelesept2006.wmv
EDIT... MAN it is a convertible even.. NICE.
Good video.