FUNCOOL get's smashed!
Burning Brakes
Joined: Aug 1999
Posts: 945
Likes: 0
From: Toronto, Canada Ontario
St. Jude Donor "08
Drifting
Joined: Dec 2003
Posts: 1,922
Likes: 0
funcool
Hey anytime you beat this guy, you've done somethin right..
.cause of the long list of his victims....
I just wanna know when he is gonna be a Novi 200 brother, I will give him lots more convincing, (if you
know what I mean). There is still a long list of stuff I am gonna do to
get in the 9's with a stick. Besides, its all Funcool's fault that I have done all these mods...all I did was listen to him and bought a "NOVI".
.cause of the long list of his victims.... I just wanna know when he is gonna be a Novi 200 brother, I will give him lots more convincing, (if youknow what I mean). There is still a long list of stuff I am gonna do to
get in the 9's with a stick. Besides, its all Funcool's fault that I have done all these mods...all I did was listen to him and bought a "NOVI".
Melting Slicks
Joined: Nov 2004
Posts: 2,715
Likes: 0
From: Tinker till it blows... then back it off a notch, maybe!!
St. Jude Donor '08
If he decides to stay loyal to maggie, they should give him a tvs 2300 or better for free, with all he has done to promote their stuff.
My stuff is yet to be tested at the higher power levels, so potential restrictions may still exist.
I am still hovering around 600/600 and hoping my stock bottom end, etc can handle that.
Also, aren't the bigger novis (2000/2200) rated at 1500 cfm or better?
The 3.3L is rated just over that....but then again I am sure that Funcool knows about overspinning...
Is today a day of mourning for Funcool??
Drifting
Joined: Dec 2003
Posts: 1,922
Likes: 0
Funcoolio
Hey I was gonna do Funcool's same set up myself this past winter, but ECS really really gave me a great deal, (thanks Chris, and Doug of ECS) I ended up selling the maggie I purchased from a fellow forum member. Funcool's set up can be put together very easily, and the ECS Kit is just as easy, but compared to turbos, the down time to build, there really is no comparison, and funcool has made some turbo guys look bad....but hey, maybe they just cant
drive he can spray that kit of his and really feed it to some
of our buds, and really have them scratchin their heads
He can still do some mods if he cared, different rear pulleys (another 4 lbs. of boost, the bigger unit, different cam, and or check the tuning).
Funcool can step it up easily and get in the 9's if he didnt care about breaking, I dont think he needs to change his pulley, he just needs some different victims now.
drive
he can spray that kit of his and really feed it to someof our buds, and really have them scratchin their heads
He can still do some mods if he cared, different rear pulleys (another 4 lbs. of boost, the bigger unit, different cam, and or check the tuning).
Funcool can step it up easily and get in the 9's if he didnt care about breaking, I dont think he needs to change his pulley, he just needs some different victims now.
Melting Slicks
Joined: Mar 2002
Posts: 3,426
Likes: 0
From: Toronto Ontario
Hey I was gonna do Funcool's same set up myself this past winter, but ECS really really gave me a great deal, (thanks Chris, and Doug of ECS) I ended up selling the maggie I purchased from a fellow forum member. Funcool's set up can be put together very easily, and the ECS Kit is just as easy, but compared to turbos, the down time to build, there really is no comparison, and funcool has made some turbo guys look bad....but hey, maybe they just cant
drive he can spray that kit of his and really feed it to some
of our buds, and really have them scratchin their heads
He can still do some mods if he cared, different rear pulleys (another 4 lbs. of boost, the bigger unit, different cam, and or check the tuning).
Funcool can step it up easily and get in the 9's if he didnt care about breaking, I dont think he needs to change his pulley, he just needs some different victims now.
drive
he can spray that kit of his and really feed it to someof our buds, and really have them scratchin their heads
He can still do some mods if he cared, different rear pulleys (another 4 lbs. of boost, the bigger unit, different cam, and or check the tuning).
Funcool can step it up easily and get in the 9's if he didnt care about breaking, I dont think he needs to change his pulley, he just needs some different victims now.
Premium Supporting Vendor
Joined: Jan 2001
Posts: 17,681
Likes: 11
From: Central Jersey
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In V Veteran
It takes a bigger man to come here and admit that. Props to ya bro 
I already have some parts heading your way to get him back. 
I already have some parts heading your way to get him back.
Melting Slicks
Joined: Sep 2004
Posts: 3,178
Likes: 13
From: N. County/San Diego
Le Mans Master
Joined: Oct 2004
Posts: 6,384
Likes: 0
From: Toronto,Ont.Canada
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Former Vendor
Joined: Nov 2002
Posts: 4,003
Likes: 12
From: Toronto Ontario
FunCool will be the first to admit he lost. Most other will make all kinds of excuses.
And as for Vinnie I would like him to run a couple of real TT vettes for comparison. 
Former Vendor
Joined: Nov 2002
Posts: 4,003
Likes: 12
From: Toronto Ontario
Hey I was gonna do Funcool's same set up myself this past winter, but ECS really really gave me a great deal, (thanks Chris, and Doug of ECS) I ended up selling the maggie I purchased from a fellow forum member. Funcool's set up can be put together very easily, and the ECS Kit is just as easy, but compared to turbos, the down time to build, there really is no comparison, and funcool has made some turbo guys look bad....but hey, maybe they just cant
drive he can spray that kit of his and really feed it to some
of our buds, and really have them scratchin their heads
He can still do some mods if he cared, different rear pulleys (another 4 lbs. of boost, the bigger unit, different cam, and or check the tuning).
Funcool can step it up easily and get in the 9's if he didnt care about breaking, I dont think he needs to change his pulley, he just needs some different victims now.
drive
he can spray that kit of his and really feed it to someof our buds, and really have them scratchin their heads
He can still do some mods if he cared, different rear pulleys (another 4 lbs. of boost, the bigger unit, different cam, and or check the tuning).
Funcool can step it up easily and get in the 9's if he didnt care about breaking, I dont think he needs to change his pulley, he just needs some different victims now.
24 hrs for a pro.
Thread Starter
Melting Slicks
Joined: Feb 2006
Posts: 2,184
Likes: 2
Thread Starter
Melting Slicks
Joined: Feb 2006
Posts: 2,184
Likes: 2
Melting Slicks
Joined: Nov 2004
Posts: 2,715
Likes: 0
From: Tinker till it blows... then back it off a notch, maybe!!
St. Jude Donor '08
Nice to see that you're not grieving Funcool...
When your finished playing with your maggie, look me up...
I might have something for you
When your finished playing with your maggie, look me up...
I might have something for you
Thread Starter
Melting Slicks
Joined: Feb 2006
Posts: 2,184
Likes: 2
All I know is that I have not gone to sleep!! I went to work this morning and worked all day and now I'm sitting in front of my computer. It's hard, every time I close my eyes, I see Vince pulling away from me. I don't now what to do! My bubble has been busted, my maggie sucks!
Former Vendor
Joined: Nov 2002
Posts: 4,003
Likes: 12
From: Toronto Ontario
All I know is that I have not gone to sleep!! I went to work this morning and worked all day and now I'm sitting in front of my computer. It's hard, every time I close my eyes, I see Vince pulling away from me. I don't now what to do! My bubble has been busted, my maggie sucks!
@ least it's pretty.
Thread Starter
Melting Slicks
Joined: Feb 2006
Posts: 2,184
Likes: 2
