FUNCOOL get's smashed!
Burning Brakes
Joined: Mar 2005
Posts: 1,096
Likes: 1
From: Murfreesboro TN
All I know is that I have not gone to sleep!! I went to work this morning and worked all day and now I'm sitting in front of my computer. It's hard, every time I close my eyes, I see Vince pulling away from me. I don't now what to do! My bubble has been busted, my maggie sucks!
LOL !!! U are awesome
Le Mans Master
Joined: Sep 2001
Posts: 8,840
Likes: 43
From: State of Confusion.
To all of you Canadiens, you might want to put FunCool on suicide watch and take all sharp instruments and even shoestrings from him!
I'd like to see what you'd do to Vince with that 200 shot! That'd be a race worth seeing!
FunCool, your car is still a FREAK, but there is always someone faster and it was just your night to meet that car! Now you know how those Guys that you smashed felt!
Hang in there................It'll get better!
PS. You gotta watch those Centrifugals, they make some power!
I'd like to see what you'd do to Vince with that 200 shot! That'd be a race worth seeing!
FunCool, your car is still a FREAK, but there is always someone faster and it was just your night to meet that car! Now you know how those Guys that you smashed felt!
Hang in there................It'll get better!
PS. You gotta watch those Centrifugals, they make some power!
Racer
Joined: Apr 2005
Posts: 475
Likes: 1
Burning Brakes
Joined: Mar 2005
Posts: 1,096
Likes: 1
From: Murfreesboro TN
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
Melting Slicks
Joined: Mar 2002
Posts: 3,426
Likes: 0
From: Toronto Ontario
Safety Car
Joined: Apr 2003
Posts: 4,251
Likes: 7
From: Woodbridge Ontario
Safety Car
Joined: Apr 2004
Posts: 4,097
Likes: 10
From: East Coast
Thread Starter
Melting Slicks
Joined: Feb 2006
Posts: 2,184
Likes: 2
Premium Supporting Vendor
Joined: Oct 2004
Posts: 23,599
Likes: 1,224
From: Providing the most proven supercharger kits for your C5/6/7 609-752-0321
Thread Starter
Melting Slicks
Joined: Feb 2006
Posts: 2,184
Likes: 2
Last edited by FunCool; Sep 4, 2007 at 07:45 PM.
Melting Slicks
Joined: Nov 2004
Posts: 2,715
Likes: 0
From: Tinker till it blows... then back it off a notch, maybe!!
St. Jude Donor '08
I spun a littler maggie to the moon (over 21k on a 4 banger at 8700 rpm)
At 16 psi sc outlet temps were 320F...at 18 psi over 400F and the blower locked at wot and snapped a 6 rib belt.
So I sprayed water pre-blower and boost went up to 21 psi and temps back down to around 320F.
320F dropped to well under 200 F after IC..sprayed some meth post IC and 
The blower lived for over 3 years like that...but I always had a back up in box ..just in case...
So much for my destructive testing of a little maggie (MP62)
At 16 psi sc outlet temps were 320F...at 18 psi over 400F and the blower locked at wot and snapped a 6 rib belt.
So I sprayed water pre-blower and boost went up to 21 psi and temps back down to around 320F.
320F dropped to well under 200 F after IC..sprayed some meth post IC and
The blower lived for over 3 years like that...but I always had a back up in box ..just in case...
So much for my destructive testing of a little maggie (MP62)