Compression
Thread Starter
Burning Brakes
Joined: Sep 2005
Posts: 1,218
Likes: 0
From: Temple TX
Compression
Im looking at a built shortblock, here are the specs, LS2 Block, stock stroke, -13.7cc pistons, stock bore, .055 gaskets, and 72cc heads= 8.6:1comp. My question is I have the 72cc heads allready, and wanting to make around 9.5:1 with my A&A D1SC kit. Should I get the heads milled......or?
Let me know guys
Let me know guys
Tech Contributor
Joined: Apr 2007
Posts: 10,924
Likes: 78
From: Forney Texas
I personally don't care for milling heads to achieve compression because it weakens the deck. Weaknesses are amplified with power adders. I would get a head with a smaller combustion chamber.
