NicksZ

I have been considering supercharging my '03 Z06... but I am worried that it will change the spirpit of the car as a light, nimble road racer. Does the superchagner and related componants make the car nose heavy? Other than the increase in power, does it drive much differently? Does it make the car handle differently? Any other thoughts?

DOUG @ ECS

The difference in weight from the charger (at least our kit) is about the difference in weight of about a half a tank of gas. Can you feel the difference in the car of a half a tank of gas?

IMO you will not lose any of the light performance feel to the car going with F/I, you will just gain a whole lot of gas pedal!

Feel free to call the shop if you would like to discuss this further.

NicksZ

Doug - Thanks for the repsonse... but a half tank of gas is perfectly situated down low, in the middle of the car... not hanging over the nose of the car in front of the front tires... there is a difference...

I am concerned that it will change the weight balance and handling of the car...

Quick 68

I could not tell any difference in handling. I'm also not a road racer or anything. All of the superchager componens are located relatively low. IMO the small amount of weight added especially in a street car is no problem for the advantages you get from a blower.

DOUG @ ECS

You cant feel the weight difference IMO, you would have to be a pretty serious road racer, with a very well set up car to notice. At that point I would not recommend any F/I set up. Not because of weight though, more so for heat, and the lack of a need for that much power.

marco383

If you can notice the difference in handling that would result from the weight of a supercharger and ancillaries on the front of a Corvette (Z06 or otherwise), there are a couple of F1 teams that might want to have a conversation with you.

Proper corner weighting will offset your concerns.

NicksZ

This all good news... THe car curently has LG Pro long tubes, Random Tech Cats and GHL Bullets... PAC 1518 springs and Yella Terra rockers with upgraded pushrods... mid 500's to the rear wheels should be doable right?

Chris@East Coast Supercharging

Yes, our kit with your headers will get you 550 no problem..

Z06wanted

I made 540rwh on 10 psi with a maggie. I wouldn't recommend a roots or twin screw for your app. Actually you can probally do a stroker and make that kind of power and work alot better for you.

0Steve@AandACorvette

Of course you have the same 91 octane we do down here in socal... but the 550 should be attainable.

NicksZ

With just the full exhaust and a Halltech Trap.. Andy of A & A tuned the car and made 386 hp to the rear wheels 3-4 years ago...

crosstheline

In response to your posting: Does Ethal Kennedy have a black dress?

NicksZ

Huh?

69dodgecharger

The only component that is drastically in front of the wheels is the intercooler and even though ECS's IC is a monster it isnt very heavy. The piping is all aluminum so it is also very light weight.

You will not notice a difference in handling, and like someone else has said if you are really concerned about it just get the car corner weighted.

you can and will make 550rwhp no problem with your set up +blower.

Vegas Vette

I supercharged my 03 about 3 years ago with one of Andys Vortech Kits it was the best mod I have ever done. Once to stomp the gas you wont be worried about weight when take off like a rocket......

NicksZ

That is what I am hoping for... getting closer to ordering it...

Todd157k

I'll probably be up there around xmas (my bro lives in Granite Bay). I'll take you for a ride.

and then we'll go to the emergency room where they can perform plastic surgery to get the smile off your face.

ONE BMF

IT does change the spirit of the car! Before i supercharged it it was a sweet mild mannered 405 HP angel to drive ---NOW it is possessed its the lead foot devil incarnate -- no its not possessed really--Yes it is --can i get an AMEN brother-Oh and HELL YEAH she drives different ,hope you like being pinned in your seat when you stomp the skinny pedal!!!PS Go with an ECS Paxton setup and their great customer service. Some people are meant to deal with the public, i am not one of em, they are though!!!!

NicksZ

Thanks Todd... I'll take you up on that... I want to see your guages too...

PM me when you are in the area...

Nick

user_name

You could always relocate the battery to offset it some if needed.