New Numbers
Thread Starter
Racer
Joined: Oct 2006
Posts: 385
Likes: 0
From: CA
New Numbers
Had an A&A kit installed at a shop local to me and they did a **** poor job. The tune threw codes constantly and all the hoses blew off since they didn't tighten the clamps. I then took the car to Nick at Newtech in Hayward and had him fix the hoses and re-tune it. It is running great now, wanted to say thanks to Nick for the awesome tune and fixing my headache. Mods: A&A kit (base kit with ram air) Lg long tube pros, off road x/pipe, Borla stinger catback it made 530 horsepower and 504 torque and peaked at 12.15lbs of boost. Stock motor no meth stock pulley size. Makes over 300lbs of torque from the start of the pull and makes 300 horsepower by 3700 rpm. Car is a blast to drive now.
Melting Slicks
Joined: May 2004
Posts: 2,103
Likes: 4
From: Oakley CA
Had an A&A kit installed at a shop local to me and they did a **** poor job. The tune threw codes constantly and all the hoses blew off since they didn't tighten the clamps. I then took the car to Nick at Newtech in Hayward and had him fix the hoses and re-tune it. It is running great now, wanted to say thanks to Nick for the awesome tune and fixing my headache. Mods: A&A kit (base kit with ram air) Lg long tube pros, off road x/pipe, Borla stinger catback it made 530 horsepower and 504 torque and peaked at 12.15lbs of boost. Stock motor no meth stock pulley size. Makes over 300lbs of torque from the start of the pull and makes 300 horsepower by 3700 rpm. Car is a blast to drive now.
Le Mans Master
Joined: Jan 2009
Posts: 7,767
Likes: 19
From: East Texas
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Le Mans Master
Joined: Feb 2007
Posts: 6,674
Likes: 57
From: Mt Pleasant, TN
Le Mans Master
Joined: Feb 2007
Posts: 9,294
Likes: 1,527
From: Oviedo Florida
2024 C5 of the Year Finalist - Modified
2024 C2 of the Year Finalist - Modified
2023 C2 of the Year Finalist - Modified
2021 C2 of the Year Finalist - Modified
2016 C5 of Year Finalist
Sweeeeeet!!!!!!!!!!!!!!!
Thread Starter
Racer
Joined: Oct 2006
Posts: 385
Likes: 0
From: CA
And lets not even get started on how they had my car for a month and didnt get it running right.
Thread Starter
Racer
Joined: Oct 2006
Posts: 385
Likes: 0
From: CA
Thread Starter
Racer
Joined: Oct 2006
Posts: 385
Likes: 0
From: CA
Drifting
Joined: Mar 2006
Posts: 1,872
Likes: 7
From: Richmond VA
Melting Slicks
Joined: May 2004
Posts: 2,103
Likes: 4
From: Oakley CA
I finished up an A&A kit and longtubes for a customer on a 02 zo6 a couple months ago. He had the stock pulley and his car was doing 11psi. Had to get a bigger pulley to bring the boost down. I think A&A's boost expectations maybe a little bit low.
Thread Starter
Racer
Joined: Oct 2006
Posts: 385
Likes: 0
From: CA
I believe it is the Si trim, its the ram air kit everyone is advertising for 6599 installed, and it is the stock pulley that came with the kit. I wish I could post the dyno sheet but I can't seem to convert it.