Adding nitrous
Thread Starter
Instructor
Joined: Feb 2011
Posts: 235
Likes: 0
From: On a mountain New York
Adding nitrous
Considering adding a N20 kit. Stock bottom end, built top end with 11.3 compression. Looking for recommendations on a kit from those who have them. I make 450rwhp now with a good tune. Is there a kit that is preferred with a piggy back timing retarder? Thanks in advance. 
Junior Member
St. Jude Donor '08
St. Jude Donor '08
Joined: Jun 2009
Posts: 225
Likes: 0
From: Pownal Maine
More a personal preference. Need to decide Wet or Dry and go from there. Plate kits vs nozzle for wet or maybe even Direct Port. Dry you need to consider injectors or and/or other electronics to get the PCM to fuel.
Vendors I have success with include Nitrous Outlet (plate systems/Nozzle systems and electronics), Harris Speed Works (plate system Nozzles and electronics), and Dynotune (Plate systems/Nozzles/electronics and billet stuff).
Vendors I have success with include Nitrous Outlet (plate systems/Nozzle systems and electronics), Harris Speed Works (plate system Nozzles and electronics), and Dynotune (Plate systems/Nozzles/electronics and billet stuff).
Supporting Vendor
Joined: Feb 2009
Posts: 4,421
Likes: 1,430
From: Mesa Az
bill if your looking for hands down the best nitrous kit you can buy i will put you in touch w/ my buddie who's house i do the car work on at. he has a sick kit that would be perfect for the car. i would however recommend not going over a 100 shot since i fly cut those pistons.
