NX Switch Panel Problem
Thread Starter
Instructor
Joined: Apr 2002
Posts: 106
Likes: 0
From: Rockford IL.
NX Switch Panel Problem
My switch panel is loose in the ash tray spot, did any of you find a good way to tighten it up? I thought about two sided tape or wood shims. Any help would be great.
Thank you,
Loud Mouth :cheers:
Thank you,
Loud Mouth :cheers:
Thread Starter
Instructor
Joined: Apr 2002
Posts: 106
Likes: 0
From: Rockford IL.
Re: NX Switch Panel Problem (99 Corvette)
Jerry, you are a great forum member! every time I post you are one of the guys who speaks up with real info. I just do not like the feel of the loose panel when you push the switches. I will let you know if I find an easy fix.
Thank you for the post,
Loud Mouth :cheers:
Thank you for the post,
Loud Mouth :cheers:
Drifting
Joined: Apr 2001
Posts: 1,773
Likes: 0
From: Norman Oklahoma
Re: NX Switch Panel Problem (Loud Mouth)
It bothered me at first but after a little while I got used to it. One idea I had was to attach some elastic string to each side and then run it through the holes where you probably ran the wires and tie it to something back there. That way you could easily get it out when you wanted to and you wouldn't have to worry about it moving. You might want to give it a try. Good to know I'm helping :cheers:
Jerry
Jerry
