When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
OK my RX can was installed on the Z06, I haven't seen it yet but the tuner thinks that the lines are too small, it's not ventilating the crankcase enough and we are getting some extra blue fog.
Of course that could be excessive pressure due to cracked rings or worse
We will have compression test results real soon. But I've already started a parts list for a forged build
I have some older valve covers on my z. I just have a breather from the ricer section at autozone. Can I route the line from the RX catch can that's supposed to go there somewhere else?
Read what this next post below is saying here it has to work like this by what RX is telling me.
I agree
Originally Posted by barrynk
The breather has a one-way valve - it allows air in ONLY.
My previous PCV implementation had a simple breather on the oil filler cap and it sprayed oil mist & smelled horrible.
Last edited by robert miller; May 15, 2012 at 02:45 PM.