WTB: TTiX kit
Racer
Joined: Feb 2009
Posts: 482
Likes: 1
From: waldorf md
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
Melting Slicks
Joined: Mar 2005
Posts: 2,225
Likes: 42
From: Okinawa
Lots of time starring at the classified's. No downpipes
Have the flanges, pipe, access to a lift and welder. Downpipes are expensive i will make my own.I have some PTK style headers that I might be interested in selling.
Thread Starter
Racer
Joined: Jul 2008
Posts: 273
Likes: 2
Racer
Joined: Feb 2009
Posts: 482
Likes: 1
From: waldorf md
Former Vendor
Joined: Nov 2002
Posts: 4,003
Likes: 12
From: Toronto Ontario
Rob,
416 751-8047
Team Owner
Joined: Jan 2007
Posts: 29,063
Likes: 1,839
From: cookeville tennessee
Melting Slicks
Joined: Mar 2005
Posts: 2,225
Likes: 42
From: Okinawa
Burning Brakes
Joined: Jan 2008
Posts: 911
Likes: 1
From: mobile alabama
heat?
you need to fix what you have. i ran that same set up, for sale, at 13 psi with meth and never went over 187*
you need a 4 gallon capacity system,5000 cfm fans, Evans npr/npg, the evens pump or a high volume pump with the Evans plug mod.
i was fine until i went to an under drive. all pulleys must then be modded to -25%
Even then 2008 was average at 16 psi.
i have the parts for this and the turbo kit 2500 or best offer. injectors are sold. most all still here.
you need a 4 gallon capacity system,5000 cfm fans, Evans npr/npg, the evens pump or a high volume pump with the Evans plug mod.
i was fine until i went to an under drive. all pulleys must then be modded to -25%
Even then 2008 was average at 16 psi.
i have the parts for this and the turbo kit 2500 or best offer. injectors are sold. most all still here.