need help
Thread Starter
Racer
Joined: Feb 2011
Posts: 310
Likes: 9
From: Miami Florida
need help
Ok guys so I have a 2001 c5 with a procharger and cam. I've been having this issue where when I brake after the first pump I loose brake pressure. I've changed the brake booster and master cylinder and car is still acting the same. Ive checked all the vacuum lines and everything seems to be fine. I need help please and thank you in advance.
Tech Contributor
Joined: Apr 2007
Posts: 10,924
Likes: 78
From: Forney Texas
Is your car idling high or flaring when you start it?
Make a block-off plate out of anything, including wood, that will fit/clamp into your blower inlet.
Pull your brake hose from the booster and hit it with compressed air and listen for leaks.
Make a block-off plate out of anything, including wood, that will fit/clamp into your blower inlet.
Pull your brake hose from the booster and hit it with compressed air and listen for leaks.
Thread Starter
Racer
Joined: Feb 2011
Posts: 310
Likes: 9
From: Miami Florida
Yes when I first start it it'll Rev up than drop after a few seconds.
I think I'm gonna try that tomorrow
I think I'm gonna try that tomorrow
