When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Guys, those of you using the NOS dry kit for the LS-1/6 have one or two Nitorus solenoids?
Also for dual dry nozzles what are the jets for 10-125 hp? (2) .036?
As I understand it the computer provides the fuel enrichment on these cars.. not like the lt-1's.. so Nos must be injectected in front of the Mas air . right?
Thanks!
Dry kit would only use one solenoid, unless you purchase another one for safety. Most people runn a 100 shot.. The computer will increase fuel, due to the cold & lean condition that you are creating by spraying N20 on the Mass Air. On the older C5's with a Fuel Pressure regulator this was easy to spike the fuel pressure (to have the injectors dump alot of fuel), but I am not sure how a 99-present would do a dry system.
I run a dry 100 shot that gets sucked in through the air filter then goes through the MAF. It's not the most powerful setup but one of the safer ones as far as a stock motor go. Makes decent power too! :cheers:
People don't like to go over 125 dry because there is a chance that it may not have enough time to atomize correctly when this happens the MAF will not correct with enough fuel. This will cause a lean condition!