Dumb Question
Administrator
Joined: Mar 2001
Posts: 367,290
Likes: 24,572
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '25
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Put them on with velcro. That way you can get in behind them to clean the fog light area.
Race Director
Joined: Jun 2000
Posts: 13,733
Likes: 66
From: Hurst, TX USA
Originally Posted by 2004SpiralGrey
Front grills by the fog lights...velcro sounds like a great idea...thanks
Team Owner
Joined: Sep 2001
Posts: 23,283
Likes: 905
From: Lake Elsinore, CA
I used the "hook" (rough) side of the Velcro on the fascia and the "loop" (soft) side ont eh screen bezels so as not to scratch the paint installing them. Use a sheet of cardboard between the mates to position the bezels to prevent them from locking before you're ready. When in place, slip the cardboard out and they are locked into place. Shove the cardboard between the mates to remove the bezels to access the foglights. I bought industrial-strength Velcro at Lowe's. 
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
2027 Corvette vs The World: Every Model vs Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
2027 Corvette Buyer's Guide: Everything You Need to Know!
Joe Kucinski
10 Things C8 Corvette Owners Hate (But Won't Tell You)
Joe Kucinski
10 Best Corvettes Coming to Barrett-Jackson Palm Beach 2026!
Brett Foote
Every Corvette Grand Sport Explained! (C2, C4, C6, C7, & C8)
Joe Kucinski
Grand Sport & Grand Sport X Launch Alongside All-New 535hp LS6 V8!
Michael S. Palmer
5 Reasons Bad Drivers Crash & 5 Ways to Avoid a Costly Mistake!
Joe Kucinski
Thread Starter
Drifting
Joined: Apr 2005
Posts: 1,340
Likes: 3
From: Levittown NY
Originally Posted by Patches
I used the "hook" (rough) side of the Velcro on the fascia and the "loop" (soft) side ont eh screen bezels so as not to scratch the paint installing them. Use a sheet of cardboard between the mates to position the bezels to prevent them from locking before you're ready. When in place, slip the cardboard out and they are locked into place. Shove the cardboard between the mates to remove the bezels to access the foglights. I bought industrial-strength Velcro at Lowe's.
thanks a lot...doing it in the morning will post some pics afterwards