Dumb Question
Administrator
Joined: Mar 2001
Posts: 368,536
Likes: 24,826
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '26
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Put them on with velcro. That way you can get in behind them to clean the fog light area.
Race Director
Joined: Jun 2000
Posts: 13,733
Likes: 66
From: Hurst, TX USA
Originally Posted by 2004SpiralGrey
Front grills by the fog lights...velcro sounds like a great idea...thanks
Team Owner
Joined: Sep 2001
Posts: 23,283
Likes: 906
From: Lake Elsinore, CA
I used the "hook" (rough) side of the Velcro on the fascia and the "loop" (soft) side ont eh screen bezels so as not to scratch the paint installing them. Use a sheet of cardboard between the mates to position the bezels to prevent them from locking before you're ready. When in place, slip the cardboard out and they are locked into place. Shove the cardboard between the mates to remove the bezels to access the foglights. I bought industrial-strength Velcro at Lowe's. 
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Thread Starter
Drifting
Joined: Apr 2005
Posts: 1,340
Likes: 3
From: Levittown NY
Originally Posted by Patches
I used the "hook" (rough) side of the Velcro on the fascia and the "loop" (soft) side ont eh screen bezels so as not to scratch the paint installing them. Use a sheet of cardboard between the mates to position the bezels to prevent them from locking before you're ready. When in place, slip the cardboard out and they are locked into place. Shove the cardboard between the mates to remove the bezels to access the foglights. I bought industrial-strength Velcro at Lowe's.
thanks a lot...doing it in the morning will post some pics afterwards
