Head Light Bulbs
Pro
Joined: Oct 2002
Posts: 519
Likes: 1
From: Just North of Buffalo NY
Be sure to disconnect the battery. Better safe than sorry. It also is a bit easier if you remove the top cover off the light housing. I used Sylvania Silverstar bulbs. They are very nice compromise between the stock bulbs and going all out with the HID thing. There was a post here a few weeks back about putting the high beam bulbs in the low beam socket. There is some adjustment needed but it improves your visibility greatly. Also did it to my DD pickup truck. good luck 
Team Owner
Joined: Jul 2004
Posts: 124,337
Likes: 283
From: .... NJ
Cruise-In VII Veteran
St. Jude Donor '05 thru '19
Follow the procedure in your owners' manual and wear some gloves when you put in the new bulb so you don't get the oil from your skin on it. If you have very big arms and hands you may want to find some one with smaller ones 
Race Director
Joined: Apr 2002
Posts: 11,485
Likes: 1
From: Far side of the Moon
CI 4-5-6-7-8 Veteran
St. Jude '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-16-'17
Keep fingers off the bulbs when you install them.Not really necessary to disconnect the battery. Just make sure the lights are turned off when you do the job.
Pro
Joined: Oct 2002
Posts: 519
Likes: 1
From: Just North of Buffalo NY
Originally Posted by lemansbleu2004
You're kidding right? You disconnect the battery to change light bulbs!!!???
