(Un)Common problem?
Thread Starter
Burning Brakes
Joined: May 2005
Posts: 947
Likes: 0
From: MS
(Un)Common problem?
Had the GM recall (column lock) in Nov. '04; aftermarket clb installed in Jan. '05 and STILL had problems with the "pull key, wait 10 seconds" code. Installed yet another clb; got the same code the following day. Mechanic suggested the key might be worn out. Sure enough, bought a new key from the dealer and woohoo - column lock free - at least for a day. Hope this (new key) does it. Have any of you had a similar problem?
Administrator
Joined: Mar 2001
Posts: 367,672
Likes: 24,663
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '25
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Never had the column lock problem with my '00 (had both the recall done and CLB installed). Hopefully the key was your culprit. 
Race Director
Joined: Apr 2005
Posts: 11,138
Likes: 11
From: Fremont CA
St. Jude Donor '06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-'18-'19-'20
NCM Sinkhole Donor
The problem you are describing is not the Column Lock, but a VATS system problem relating to the little pellet in the key. Try cleaning the old key well with some rubbing alcohol and a q-tip. You will likely be able to use your old key again 
Melting Slicks
Joined: Feb 2005
Posts: 2,210
Likes: 0
Originally Posted by doje
The problem you are describing is not the Column Lock, but a VATS system problem relating to the little pellet in the key. Try cleaning the old key well with some rubbing alcohol and a q-tip. You will likely be able to use your old key again
nice tip!
