Flowmaster exhaust
Racer
Joined: Apr 2006
Posts: 325
Likes: 0
From: Goodyear AZ
There was a link to this site in a Borla thread:
http://www.ls1sounds.com/
I am starting to shop for exhaust for my '04 and I thought the Flowmaster sounded pretty freaking good, and I've never really been a fan.
I also really liked the sound of the SLP Loudmouth.
http://www.ls1sounds.com/
I am starting to shop for exhaust for my '04 and I thought the Flowmaster sounded pretty freaking good, and I've never really been a fan.
I also really liked the sound of the SLP Loudmouth.
Thread Starter
Advanced
Joined: Aug 2005
Posts: 66
Likes: 0
From: Ft.Myers FL
I listened to them on that same link they sound excellent to me, mostly camaros and trans ams use them and seem to sound pretty sweet, maybe it is because they have smaller pipes people don't like em ?? I really liked the sound of the GHL BULLETS as well, anybody know best priced site to get them?
Drifting
Joined: Apr 2005
Posts: 1,899
Likes: 1
From: Oceanside CA
I have them and they sound pretty good. Actually they could be a little louder for my taste, but the sound at WOT is fine. Most guys here don't like them, but I think that is due more to their reputation as a cheap Mustang exhaust than anything else. At $750 installed they were an inexpensive alternative to the pricier systems for me. As far as performance gains, I don't think any of the aftermarket systems make much difference, especially on a stock car.
Melting Slicks
Joined: Sep 2001
Posts: 2,218
Likes: 0
From: Glendale AZ
I have been a big fan of flowmaster's for a while
Dodge Magnum
Chevy Impala
71 Big Block Corvette
Dodge durango
Dodge Dakota
all my cars have gotten flowmaster. Ive enjoyed the sound everytime.
I will be installing flowmaster's on my vette this weekend. It will end up costing me about 260.00 for everything. Install, tips, mufflers, everything.
FYI flowmaster wants $400.00 EACH for this
while you can buy this for $100 per (Flowmaster part #52580)
for me its not worth $300.00 rip off for black paint, dual outs, and small tips.
This is a corvette Tax at its finest.
cheers
chad
Dodge Magnum
Chevy Impala
71 Big Block Corvette
Dodge durango
Dodge Dakota
all my cars have gotten flowmaster. Ive enjoyed the sound everytime.
I will be installing flowmaster's on my vette this weekend. It will end up costing me about 260.00 for everything. Install, tips, mufflers, everything.
FYI flowmaster wants $400.00 EACH for this
while you can buy this for $100 per (Flowmaster part #52580)
for me its not worth $300.00 rip off for black paint, dual outs, and small tips.
This is a corvette Tax at its finest.
cheers
chad
Last edited by 71'AirStrike; May 17, 2006 at 11:51 PM.
Thread Starter
Advanced
Joined: Aug 2005
Posts: 66
Likes: 0
From: Ft.Myers FL
johnsc5 thank you for your opinion on the flowmasters, what series or system do you have? mufflers, cat-back,x-pipe, H-pipe, what exactly does it consist of? you wouldn't happen to have a sound clip? thanks
Thread Starter
Advanced
Joined: Aug 2005
Posts: 66
Likes: 0
From: Ft.Myers FL
Originally Posted by 71'AirStrike
I have been a big fan of flowmaster's for a while
Dodge Magnum
Chevy Impala
71 Big Block Corvette
Dodge durango
Dodge Dakota
all my cars have gotten flowmaster. Ive enjoyed the sound everytime.
I will be installing flowmaster's on my vette this weekend. It will end up costing me about 260.00 for everything. Install, tips, mufflers, everything.
FYI flowmaster wants $400.00 EACH for this
while you can buy this for $100 per
for me its not worth $300.00 rip off for black paint, dual outs, and small tips.
This is a corvette Tax at its finest.
cheers
chad
Dodge Magnum
Chevy Impala
71 Big Block Corvette
Dodge durango
Dodge Dakota
all my cars have gotten flowmaster. Ive enjoyed the sound everytime.
I will be installing flowmaster's on my vette this weekend. It will end up costing me about 260.00 for everything. Install, tips, mufflers, everything.
FYI flowmaster wants $400.00 EACH for this
while you can buy this for $100 per
for me its not worth $300.00 rip off for black paint, dual outs, and small tips.
This is a corvette Tax at its finest.
cheers
chad
r6realtor
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Melting Slicks
Joined: Sep 2001
Posts: 2,218
Likes: 0
From: Glendale AZ
that $260 will be my out of pocket cost for the total system. period.
Order the mufflers from Summit, go to your favorite muffler shop (the mom and pop places are the best
)
pick out the tips you want and say the magic word
"I have cash and I dont need a recipt"
Here is the break down
200 for mufflers
30 for chrome tips
30 for welding, install and materials. They will only need about 12" of pipe. Heck they could use scrap from a prior job. this is a bang in bang out gig.
My thinking is this. Chevy designed a straight and smooth system so paying money for a cat back is a waist of pipe and materials.
I think getting high flow cats is a scam, but thats a different thread.
Just add in the muffler you wnat and drive.
cheers
chad
Order the mufflers from Summit, go to your favorite muffler shop (the mom and pop places are the best
)pick out the tips you want and say the magic word
"I have cash and I dont need a recipt"
Here is the break down
200 for mufflers
30 for chrome tips
30 for welding, install and materials. They will only need about 12" of pipe. Heck they could use scrap from a prior job. this is a bang in bang out gig.
My thinking is this. Chevy designed a straight and smooth system so paying money for a cat back is a waist of pipe and materials.
I think getting high flow cats is a scam, but thats a different thread.
Just add in the muffler you wnat and drive.
cheers
chad
Melting Slicks
Joined: Sep 2001
Posts: 2,218
Likes: 0
From: Glendale AZ
Originally Posted by BrianWe
My friend has flowmasters in his vert. I hate them. They are way too loud during crusing on the highway to the point where it is difficult to have a conversation.
I hope our tasts are different BrianWe and I end up enjoying them *fingers crossed*
cheers
chad
Thread Starter
Advanced
Joined: Aug 2005
Posts: 66
Likes: 0
From: Ft.Myers FL
Originally Posted by 71'AirStrike
I like loud cars, but the vette is different. I too have a vert and I may end up disliking them. But for 260 out of pocked compaired to the 800-1000 the other kits cost.Ill take that chance.
I hope our tasts are different BrianWe and I end up enjoying them *fingers crossed*
cheers
chad
I hope our tasts are different BrianWe and I end up enjoying them *fingers crossed*
cheers
chad
r6realtor
Drifting
Joined: Apr 2005
Posts: 1,899
Likes: 1
From: Oceanside CA
Originally Posted by r6realtor
johnsc5 thank you for your opinion on the flowmasters, what series or system do you have? mufflers, cat-back,x-pipe, H-pipe, what exactly does it consist of? you wouldn't happen to have a sound clip? thanks
Drifting
Joined: Jun 2002
Posts: 1,406
Likes: 0
From: York PA
Originally Posted by r6realtor
I listened to them on that same link they sound excellent to me, mostly camaros and trans ams use them and seem to sound pretty sweet, maybe it is because they have smaller pipes people don't like em ?? I really liked the sound of the GHL BULLETS as well, anybody know best priced site to get them?
You won't regret them; excellent choice of exhaust
